BougeRV A1317-04402 Installation Instructions

SKU: A1317-04402
Notes Before Using
1. If this product is missing parts or defective, please reach out to us for free part replacements via
service@bougerv.com or +1 669 232 7427(Sunday to Thursday 18:00PM-24:00PM PST)（Please attach your Amazon
order ID in the email, and if the key is lost, please attached the key code). If this product is found incompatible with
your vehicle, you could contact us to see if we have other models for your vehicle. Anything you'd like to ask, feel free
to contact us.
2. The weight of the cargo must not exceed the maximum weight limit of 265 lbs(120kg).
3. Check the cross bar mounting bolts frequently for security, re-tighten it if necessary.
4. Place a towel or mat before installation to prevent damage to the car roof.
5. For your safety, we recommend driving not exceed 120km/h (75mph).
KIT CONTENTS:
A
B
C D
a) The round side of the bar faces to the front, and the pointy side faces to the rear (with arrow label)
b) The base is marked with "L" and "R", "L" means left base, "R" means right base
Step 1:
Install the base with the bar
Note:
Please fully tighten the left base (Fixed), and don't
fully tighten the right base (Adjustable)
E F
Front
CROSSBAR KIT FOR Ford Bronco On-Road 2021+
Number
A
B
C
D
E
G
F
G
Step 2:
Loosen the bottom bolt on both crossbars
NOTE: Do not fully remove the bolts
Description
Front Crossbar (Longer)
Rear Crossbar (Shorter)
Base (LH)
Base (RH)
M6×20mm Bolt (1 is spare)
Washer (1 is spare)
T4 Allen Key
Rear
Quantity
1
1
2
2
9
9
2