Advertisement
Quick Links
HOXTON 2.0
290mm Rain shower head and arm
i
IMPORTANT INFORMATION BEFORE YOU START
Please read carefully and keep this information for further reference.
All products manufactured and supplied by Britton are
safe provided they are installed,used correctly and receive
regular maintenance in accordance with these instructions. If
you are in any doubt about your ability to install this product
safely you must employ the services of an experienced
meet the requirements of the Water Supply (Water Fittings)
Regulations 1999 and Scottish Byelaws 2004.
Operating pressure range: Minimum 0.5 bar, Maximum 5.0 bar.
If the mains pressure is over 5 bar, then a flow regulator
should be fitted.
Note: Nominally equal (balanced) inlet supply pressures are
recommended for optimum performance with mixer taps.
1
Designed to comply with BS EN 817 for single hole mixers,
and to be used within systems designed to BS 6700. BS 6700
recommends the temperature of stored water should never
exceed 65°C.
to meet all normal requirements and will minimise the build
at low pressure (tank fed), then the minimum distance from
the highest installed position of the outlet to the underside of
the cold tank should be at least 2 metres to ensure adequate
performance.
PRODUCT CODES:
HOX300
V10324
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Britton HOXTON 2.0
Summary of Contents for Britton HOXTON 2.0
- Page 1 IMPORTANT INFORMATION BEFORE YOU START Please read carefully and keep this information for further reference. All products manufactured and supplied by Britton are Designed to comply with BS EN 817 for single hole mixers, safe provided they are installed,used correctly and receive regular maintenance in accordance with these instructions.
- Page 2 DIMENSIONS NOTE: ALL DIMENSIONS IN MILLIMETRES IMPORTANT INFORMATION Please read carefully and keep this information for further reference. The product should be installed in compliance with the Water Regulations. Please check this product immediately to ensure that it has not been damaged and is complete. using.
-
Page 3: Before You Start
BEFORE YOU START Important Pre-Installation Notes Warning: Before starting any installation please consider the following: before drilling into walls, check that there are no hidden electrical wires, cables or wate supply pipes. This can be checked with the aid of an electronic detector. If power tools are used do not forget to: - Wear eye protection Important:... -
Page 4: Installation
INSTALLATION INSTALLATION Install the shower arm using a suitable thread sealant SHOWER ARM WALL INLET PIPE SHOWER HEAD... -
Page 5: Care And Maintenance
CARE & MAINTENANCE The material we use in our brassware is very durable, nevertheless care should be taken when cleaning them. They should vulnerable to acid attack and some strong substances such as household cleaners, disinfectants, denture cleaners, hairdyes, wine making, and photographic chemicals can cause the surface to go black or peel. Note: Never use abrasive detergents or disinfectants or those containing alcohol, hydrochloric acid or phosphoric acid.
Need help?
Do you have a question about the HOXTON 2.0 and is the answer not in the manual?
Questions and answers