Summary of Contents for Wessel-Werk PowerWand EBK 250
- Page 1 EBK 250DC+PowerWand EBK 250 120 volt 120v Power Brush/Battery Brush/Battery Wand Operating Manual Wessel-Werk USA 128 Gasoline Alley Mooresville, NC 28117 www.wessel-werk.com 704-658-0502...
- Page 2 Safety Instructions • Read and follow these instructions before using this product, as well as the instructions for your vacuum cleaner. This knowledge will protect Attention! yourself and prevent damage to the device and floors being cleaned. Do not use the device without •...
- Page 3 This booklet has basic operating instructions for the following vacuum cleaner accessories: EBK 250 Battery Powerhead BatteryWand EBK 250 Battery with EBK 250 120v PowerWand with Wand EBK 250 120v AC Cord Operated Power Brush...
- Page 4 Assembly and Connection to the Vacuum Please Note: Only operate this battery brush with the corresponding There is a delay when turning the brush on and off. battery wand. The integrated electrical connection The operator must PRESS AND HOLD the button to system will automatically couple when attached to the turn the brush on and off.
- Page 5 This electric brush has been designed to clean both hard surfaces and carpet. A set of 2 brushrolls Overload protection commonly come with the EBK 250. The brushroll with This powerhead/powerwand is equipt with automatic 3 grey soft brush strips is designed for hard floors. The overload protection.
- Page 6 The battery pack is maintenance free. • Replacement of the electrical connector only with original manufacturers replacement parts. Do not allow cleaners, disinfectants or liquids to enter • If threads or hair have been wrapped around the brush any openings in the device. Failure to do so could cause roller bearing that cannot be removed in the manner damage to the device and the operator.
-
Page 7: For Your Records
Picture#2 For your Records Rating Plate The model number is indicated on the rating plate which is located on the bottom of the nozzle. For prompt and complete service, always refer to these numbers when contacting your place of purchase for service. EBK 250 Model No. - Page 8 Part Number Description Baseplate Complete 120v includes 13.9 099-309 baseplate, neck and hose Baseplate Complete 24v includes 13.9 099-316 baseplate, neck and hose Cover with Carbon Fiber Decal Black 13.9 099-307 Cover with Carbon Fiber Decal White 13.9 099-308 Motor Complete 120v 13.9 099-311 Motor Complete 24v 13.9 099-310...
- Page 9 This device complies with the following EG directives: • 2014/35/EU – Low Voltage Directive • 2014/30/EU – EMC directive • 2011/65/EG – RoHS directive August 2022 -16-...
Need help?
Do you have a question about the PowerWand EBK 250 and is the answer not in the manual?
Questions and answers