Parts of Steam Ironing Machine
120V 60Hz 1200W
Use Procedures of Steam Ironing Machine
① Press the buttons on both sides of the water tank at the same time, take out the water tank
and add water to maximum water level;
②Put back the water tank and plug in electricity, and then press the round button at the back
to enter the preheating stage;
③During preheating, the indicator lights up, and after preheating, the indicator lights go out;
④ During preheating, do not press the front button;
⑤After preheating, press the front button to produce steam;
⑥ After preheating is completed, steam can be generated when sliding down the front button
locking key;
⑦ After using, take out the water tank and let the machine discharge residual steam.
Matters needing attention
Each of our products has been strictly tested. The water drops in the water tank are test
residues. Please feel free to use them. Before using this product, please read this instruction
manual carefully and keep it for future reference.
Danger
◆ Do not immerse this product in water or other liquids, and do not rinse under the faucet.
◆ Be careful of the hot steam generated by the ironing machine. Steam may cause burns.
Warning
Serial
Name of Parts
Number
1
water tank
2
water tank removal
button
3
steam switch
4
steam lock button
5
stainless steel panel
6
brushes
7
indicator light
8
thread protector
Need help?
Do you have a question about the 197644504923 and is the answer not in the manual?
Questions and answers