®
Home Master
Reverse Osmosis System Filter Change Instructions
discharge may be accompanied by a harmless
discoloration due to loose carbon.
10. After the trickle runs clear, close the lever on the
RO faucet and allow the system to pressurize. When
the system has pressurized fully it will shut off
automatically, usually in a few minutes.
(IMPORTANT STEP) dry unit thoroughly again,
gently tug on each connection, and check for leaks.
Then open the reserve tank valve slowly. Allow
reserve tank to fill until full, which may take up to 3
hours.
11. When the tank has filled completely, and the
system shuts-off automatically, then close feed
valve and open RO faucet to allow the water to
drain out until it comes to a complete stop. Then
reopen feed valve and allow system to refill again. A
further tank flush may be necessary depending on
initial tank fill level. Finally, if present, open the
inline ball valve feeding the refrigerator/icemaker
VIDEO INSTUCTIONS:
System schematics available upon request.
www.ThePerfectWater.com
service at 877-693-7873. We will be happy to assist
you with your filter change.
Perfect Water Technologies, Inc.
Copyright © 2021
Version 9
Page 4
Customer Service Hotline 1-877-693-PURE
- scan 2d QR code
with smartphone
camera -
or contact customer
Perfect Water Technologies
Home Master
Reverse Osmosis System
Filter Change Instructions
®
Series
1
Need help?
Do you have a question about the Home Master Series and is the answer not in the manual?
Questions and answers