Summary of Contents for DELTA GROUP VIVOTEK FT9361-R
- Page 1 FT9361-R Installation Guide 1. Physical Description Description Description Lens Display Flash light NFC induction zone TOF lens Retention screw Light sensor Reset button Infrared lens Cables Tamper key...
-
Page 2: Installation
2. Installation 2.1 Bracket Moumnt * The mount bracket will be available later. 1. Secure the back plate to the mount bracket using 4 M3 x 8.0mm screws. - Page 3 2. Route cables through a hole on the wall or through the bracket. Below are the definitions for these cables. Lines Name Color Description Line1 Black 12V input Brown White 12V input WG_DO Purple Wiegand/output DO Blue WG_DI Green Wiegand/output DO DC12V_OUT Orange 12V output...
- Page 4 3. Mount the sensor device onto the bracket by sliding it from top down.
-
Page 5: Server Configuration
3. Login and Registration 3.1 Server Configuration 1) Network configuration: When the FT9361-R is started, proceed with network configuration. DHCP or Static IPs are applicable. Figure 4-1 Network Configuration 2) Server：The FT9361-R requires a connection to a VAST Face Manager server. Click on the Configuration button on the upper right of screen to configure a VAST Face Manager server IP. - Page 6 3.2 Log in to the account 4) Login：On the first startup, credentials are required for a name and password. Figure 4-3 Login 3.3 Registration 1） Equipment Registration：Register the name of the device and the installation site.
Need help?
Do you have a question about the VIVOTEK FT9361-R and is the answer not in the manual?
Questions and answers