Parts List Part Description Qty. Mesh Cover handle Mesh Cover Hardware List Bracket Outer Rim A Outer Rim B M6x12mm Fire Bowl M6mm M6 Wrench x1 Poker...
Page 3
Warnings 1.DO NOT use this fire pit without reading this entire document and all WARNINGS, cautions and instructions. 2.This item is for outdoor use only, and shall NOT be used in a building, garage or any other enclosed area 3.DO NOT use this fire pit for indoor heating. TOXIC carbon monoxide fumes can accumulate and cause asphyxiation or death 4.This fire pit is NOT for commercial use.
Page 4
20.Always empty this fire pit before each use. 21.DO NOT wear flammable or loose clothing when operating this fire pit. 22.DO NOT use in windy conditions. 23.DO NOT use gasoline, kerosene, diesel fuel, lighter fluid to start or relight fires. 24.Keep all electrical cords away from a hot fire pit.
Assembly Instruction Tools Required: Phillips screwdriver (not included) and wrench (included). 1. Insert the Mesh Cover handle into The Mesh Cover . Using one M6mm Nut(B) and tighten it with wrench(C) 2.Assemble each Leg using three M6x12mm bolt (A),Tighten with a screwdriver.
4. Remove built-up creosote from components with a chimney cleaning product. Customer Service Thank you for ordering our product If you have any questions please feel free to contact us at (562) 456 0507 or email to inquiry@hykolity.com We always find ways to improve!...
Need help?
Do you have a question about the WHB-0006 and is the answer not in the manual?
Questions and answers