Table of Contents Safety Information Introduction/What's Included Components Technical Specification Operational Instructions 5-11 How to Charge How to use Jump Start function How to use Torch function How to use Power Bank function Limited Warranty...
READ ALL safety warnings and this user manual in its entirety before using the Jump- Lite. By using the Jump-Lite, you hereby agree at all times to comply fully with all safety warnings, operating instructions and general safety information in this user manual.
Introduction Hylite Jump-Lite Never be stranded with a dead battery or in darkness again! The Jump-Lite is the most practical, portable, and powerful vehicle jump starter on the market. The innovative combined capabilities include a battery jump starter, flashlight, and power bank.
Technical Specifications 215 x 62.5 x 55 mm Dimensions Weight 0.56 kg Battery Capacity 8000 mAh / 29.6 Wh Jump Starter Port DC 12V / 200A (Start) - 600A (Peak) Output LED Flashlight 8W / 330 Lumens / 150 Meters Power Jump Starter 4-cyl &...
Operation Instructions How to charge Jump-Lite - SAFETY INFORMATION SAFETY FIRST: To prevent any harm, READ ALL safety warnings located in the “Safety Information” section of the user manual before attempting to operate. HOW TO CHARGE IN A HOME Use wall adapter and...
Page 8
HOW TO CHARGE IN A CAR Use car adapter and plug MicroUSB cable MicroUSB!Input located on the into the back panel of the Jump-Lite. Plug car adapter into a standard cigarette lighter receptacle!in!a!vehicle. The battery is completely charged when all 4 Indicator...
The Jump-Lite is not intended for use in a commercial repair facility. The Jump-Lite is not intended to be stored outdoors and should be stored in a sheltered environment. It is intended for temporary use outdoors and reasonable care should be exercised when using this device in wet conditions.
Page 10
Lite and flip to the ON position. Plug the Smart Cable* into the Jump Starter Port located on the back panel of the Jump-Lite. Once plugged in, the green and red Indicator Lights will flash in an alternating pattern on the Smart Cable.
Page 11
3 times. Once the vehicle has been successfully started, disconnect the Smart Cable from the Jump-Lite. Remove the Smart Clamps from the positive and negative battery terminals one at a time. Flip the Main Power Switch to the OFF position when not in use to eliminate unnecessary power loss.
Operation Instructions HOW TO USE TORCH Prior to using the LED torch, locate the Main Power Switch on the back panel of the Jump- Lite and flip to the ON position. Press and hold the LED torch Power Button for 1 second to turn the flashlight ON.
HOW TO USE THE POWER BANK Prior to connecting any USB chargeable device, locate the Main Power switch on the back panel of the Jump-Lite and flip to the ON position. Connect the USB end to the USB Charging Port Located on the back panel of the Jump-Lite.
Limited Warranty This product is subject to the standard 12m limited warranty under the terms defined at solon-group.com. The warranty is applicable to the direct purchaser from this agent only and not transferable to any 3rd party. The standard terms as described above will define any general circumstances where the warranty may not apply and/or be voided.
Need help?
Do you have a question about the JUMP-LITE and is the answer not in the manual?
Questions and answers