What’s in the box ANR-1000 Carry Headset Case USB Charging 3.5mm Audio Cable Cable EMAIL SUPPORT Support@andreacommunications.com CALL SUPPORT 800.442.7787...
Page 3
Thank you for purchasing the Andrea Communications ANR-1000 Wireless Bluetooth® Headset with Noise Cancelling Microphone and Active Noise Reduction (ANR) Earphones. We hope you enjoy them! This instruction manual will get you started and help you make the most of your new headset.
Page 4
( 4 ) ( 7 ) ( 1 ) ( 3 ) ( 2 ) ( 6 ) ( 5 ) ( 1 ) Green LED - lights when ANR is turned on Red LED - lights when headset is charging Blue/Red LED –...
Pressing the button again for 3 seconds will turn the headset off. PAIRING YOUR HEADSET While in pairing mode (blue and red LED flashing) find "Andrea ANR-1000" on your device and select. When pairing is success- ful the LED will slowly flash blue. Some devices may require a password to connect to Bluetooth.
3.5mm jack on the headset. When the cable is plugged in Bluetooth mode turns off and blue LED will not be lit. When in auxiliary mode you can plug your ANR-1000 into any headphone jack on computers, laptops, tablets and other devices including airline seats.
When you turn them back on, increase the volume until it reaches a comfortable and safe level. CARE AND MAINTENANCE Follow these recommendations to keep your ANR-1000 Wireless Bluetooth® Stereo Headset working for years to come. DO NOT modify or attempt to repair this headset.
Current Consumption: SNR: ≥75dB 500 A THD: ≤0.1 TECHNICAL SERVICE We hope that you enjoy your Andrea Communications ANR-1000 Wireless Bluetooth® Headset with Noise Cancelling Microphone & Active Noise Reduction (ANR) Earphones. If you have any additional questions, please visit our website at www.andreacommunications.com/support or...
Need help?
Do you have a question about the ANR-1000 and is the answer not in the manual?
Questions and answers