Advertisement
Quick Links
Advertisement
Related Manuals for ROROS HETTA PCU6.1-P
Summary of Contents for ROROS HETTA PCU6.1-P
- Page 1 RØROS HETTA PCU6.1-P Installation and Pairing Manual 22143_01-A...
-
Page 2: Information And Warnings
1. Introduction 3. PCU Description This manual describes the installation 3.1 Purpose of Use process of the PCU6.1-P power control This is a power control unit for a unit. RørosHetta Sense cooker hood. The The power control unit is installed PCU is a safety device that is connected together with the RørosHetta Sense... - Page 3 PCU6.1-P - Installation 1-phase, 3-pin plug. 226 mm 40 mm 230 V MAX. 25 A MICRO DISCONNECTION WARNING Do not install the power control unit Ⓑ where it will be exposed to excessive Turn the power off at the isolation...
- Page 4 4xA A Connect the stove with 3-pin plug.
- Page 5 5. Pairing the PCU with the cooker hood In order for the PCU to work properly, it needs to be paired with the cooker hood. With the RørosHetta Sense cooker hood, you have two options to set up the PCU in your kitchen environment: you can do the pairing via the RørosHetta mobile app or do a manual setup without the app.
- Page 6 5.3 Check the working order 1. Turn on one plate with medium high power. With an induction cooker use a suitable pan. 2. Press and hold the OK button ❶ for 5 seconds: the system should cut off the cooker power. 3.
Need help?
Do you have a question about the PCU6.1-P and is the answer not in the manual?
Questions and answers