Rubbermaid 6143 Assembly Instructions

Rubbermaid Commercial Products Inc.
6143, 6144, 6145 & 6146 Siep-On Can Assembly & Cleaning Instructions
Our Step-On Containers meet Factory Mutual System's stringent standards for fire safety.
Under normal use with the lid shut against the'container base; flames will be extinguished.
Warning: Do not overfill container or liner forcing lid ajar from base. Empty contents dat'y.
Step 1 Removing and Attaching the Lid
Lid Removal j |
Close lid and turn product up-side down. Rotate each pin and position slot towards you. With 3/8" wide flat blade
screw driver positioned within small base rectangle, insertblade into pin slot and twist until pin breaks. Push broken
pieces from holes. Figure 1-1.
Figure 1-1
————Hinge Pin
- Attaching New Lid
With lid hooked and closed to base, position product on its side on floor with lid
hole recess facing up. Insert one hinge pin shaft through the hole in the lid until
resistance is felt. WITH THE HEEL OF YOUR HAND FORCE PIN HEAD UNTIL
SEATED AGAINST LID RECESSED SURFACE. Tum base over and repeat
steps to install second bin. Figure 1-2.
Step 2 Pedal-Lifter to Lid Attachment
Figure 2-2
Figure 2-3
ooks
Figure 2-1