Table of Contents
Summary of Contents for ZKTeco SL06-CL20H
- Page 1 Installation Guide Model: SL06-CL20H Version: 1.0 English Due to the regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual.
- Page 2 Important Notes Please read this Installation Guide carefully before installation and contact the Customer Care Service if you have any questions regarding the installation. To avoid any future service charges that may arise as a result of incorrect installation, it is recommended that installation must be performed by a professional technician to prevent any potential service charges that may occur due to incorrect installation.
-
Page 3: What's In The Box
What’s in the Box Indoor Unit Outdoor Unit Strike Plate IC Wristband Screw B 35mm Screw A Screw B 30mm Screw C Note: This type of cabinet lock suits the cabinet of thickness 15mm to 25mm. If customization is required, please contact us. -
Page 4: Drill Holes
Drill Holes Drill holes on the cabinet door. (Unit: mm) 63.2 31.6 31.6 31.3 131.0 24.0 48.7... -
Page 5: Installation Procedure
Installation Procedure Wood Cabinet Situation Situation I: Install the indoor and outdoor units with screw B. Install the Strike Plate with Screw A. Note: The Strike Plate Installation Distance: Align the strike plate to the cabinet wall, or make the strike plate under the cabinet wall about 1mm. - Page 6 Situation II: Install the indoor and outdoor units with screw B. Install the Strike Plate with Screw A. Note: The Strike Plate Installation Distance: Equals Width of cabinet wall plus 1mm. Indoor Unit Installation Distance: Equals Width of Strike Plate. Strike Plate Screw A Battery Cover...
- Page 7 User Manual Model: SL06-CL20H Version: 1.0 English Due to the regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual.
-
Page 8: Table Of Contents
Important Notes This device is divided into self-service password mode and independent password mode. Please con rm which mode you need. Please keep your master card in a safe place, and remember the master password. Do not remove the batteries from the lock while it is in operation. -
Page 9: Product Overview
Product Overview (Unit: mm) 25.5 63.2 14.2 131.0 69.2 55.2 14.7 108.0 28.0 10.5 12.0 65.0... -
Page 10: De Nition (Public Mode)
De nition (Public Mode) Public Mode: The public mode means that the latch will not pop out automatically after unlocking. This feature it is suitable for public uses, such as Gyms, Spas, Clubs, etc. Card Type: This mode has three card types, Administrator Card, Manager Card and Guest Card. -
Page 11: How To Use
How to Use 1. Reset the Lock Press the Reset button once the lock beeps twice and the keypad keeps ashing. 2. Register the Administrator Card After swiping a card to register it as an Administrator Card, the lock has been successfully reset to public mode. Note: Press the Reset button to switch the mode, and the keypad light ashes for 10s. - Page 12 6. Register the Guest Password In the case of unlocked, swipe the Guest Card you set up, the keypad light is always on. While the keypad light is on, you can enter key + ”6-digit passcode” + key. Once you hear a beep, enter key + ”6-digit passcode”...
-
Page 13: De Nition (Private Mode)
De nition (Private Mode) Private Mode: The private mode means that the latch will pop out automatically after unlocking, This feature it is suitable for personnel or high-level security applications. Card Type: Private mode includes three types of cards — Administrator Card, Manager Card, and Guest Card. -
Page 14: How To Use
How to Use 1. Reset the Lock Continuously press the Reset button until you hear two beeps from the lock, followed by a Do-ra-mi sound, while the keypad continues ashing. 2. Register the Administrator Card After Swiping a card to register it as an Administrator Card, the lock has been successfully reset to private mode. - Page 15 While the keypad light is on, enter key + “6-digit passcode” + key. When a beep is heard, enter key + “6-digit passcode” + key again. Then you can enter the password you set and press the key to unlock the lock. Note: When locked, input the Manager Password to unlock.
Need help?
Do you have a question about the SL06-CL20H and is the answer not in the manual?
Questions and answers