Related Manuals for Displays2go CHRTBTRCP
Summary of Contents for Displays2go CHRTBTRCP
- Page 1 Display Stuff Better. CHARGING TABLE WITH 6 RETRACTING CABLES, 1 WIRELESS PAD, AND CUSTOM PRINTED GRAPHICS, PORTABLE Assembly Instructions SKU: CHRTBTRCP (Charging Table) SKU: CHRTBTRG (Replacement Graphic) Scan the QR code to visit the product page. V2.0...
-
Page 2: Safety And Warnings
G: Travel Bag .............................1 Safety & Warnings Displays2go is not responsible for any personal injury or product damage due to mishandling, incorrect mounting, incorrect assembly or incorrect use of this product. Please follow these instructions to avoid risk of electric shock and/or short circuit. - Page 3 Assembly 1. Insert the cloth edge into the channel of the base. 2. Connect all poles to create 4 full-length poles. 3. Insert poles into the tabletop and turn to tighten. 4. Secure the base plate onto poles with 4 screw knobs.
- Page 4 5. Connect power extension cable to the power box. 6. Pull the power extension cable out through the hole of the base. 7. Place a weight (not included, approximately 13lbs recommended) onto base to enhance the stability of the charging table. 8.
- Page 5 5. Replace cover and screws on both Power Box and cable clip. 6. Reconnect unit to power. Assembly is complete. If you have any questions regarding our products, please visit us at www.displays2go.com or contact Displays2go customer service at 844-221-3388.
Need help?
Do you have a question about the CHRTBTRCP and is the answer not in the manual?
Questions and answers