H2OPro JDEM 100 User Manual

Do not connect the jug with water inside to the base up to point 4. (Final step),
always make sure that the base is connected to the Tower or has the appropriate
cap inserted in the fitting.
1. Getting started
Fill the jug with tap water
separate from the base), immerse
the filter for 10 minutes.
2. Filter assembly
STEP 1.
Align the arrow on the filter with the
vertical line on the filter holder and insert
the filter.
3. Base assembly
In case of connection of the JDEM100 base to the
Tower, push the fitting ring and pull off the cap.
Connect one side of the tube.
JDEM 100
User Manual
(keeping it
Make sure the filter is inserted correctly.
STEP 1.
STEP 3.
STEP 2.
STEP 2.
Insert one of the two types of fittings included in the kit,
taking care to insert it from the side without the grooves.
STEP 4.
See the manual in the Tower package
for connecting to the Tower
Then remove the filter, empty the
jug and rinse the filler holder.
STEP 3.
counter-
Rotate the filter
clockwise
until it reaches
the end stop.
Pag 1/2