Festive P030609 Assembly And Usage Instructions

TYPE
SSTOP100
QSF1001
Assembly and Usage Instructions for: 100CM SANTA
STOP HERE SIGN – P030609
BOX CONTENTS
1 x Santa stop here sign 2 x poles
1 x Transformer 1 x ground stake
ASSEMBLY INSTRUCTIONS
Insert the pole into the sign, next insert the second pole into the pole with the sign connected,
for using outside insert the ground stake into the bottom of the pole.
OPERATING INSTRUCTIONS
Always plug transformer into wall socket (indoors) the sign will light up.
To control the 8 functions on this item, press the button on the remote control.
The functions are as follows: Combination, in waves, sequential, slo-glo, chasing/flash, slow
fade, twinkle/flash & steady on.
WARNINGS
It is very important that this product is NEVER DIRECTLY connected to the mains supply without
the supplied transformer.
Keep away from children & pets.
Do not operate this item whilst still in the packaging.
The LED lamps are not replaceable.
The transformer is only suitable for indoor use.
Do not try to connect this set electrically to another set.
If there is any damage or breakage to the electric wire, please dispose of safely.
This light set is suitable for indoor & outdoor use.
Ensure that cables are fully unwound and sited where they will not become damaged or present
a tripping hazard.
Do not secure the wiring of this product with staples or nails.
Do not close doors or windows on the product, as this may damage the wiring insulation.
Do not submerge this product in water (e.g. puddles, guttering or ponds)
Do not overload wall sockets. Use different sockets around the house to plug in multiple lights
to balance the load.
Do not damage the insulation of cable or LED holder.