Related Manuals for SolaX Power GATEWAY-ECC
Summary of Contents for SolaX Power GATEWAY-ECC
- Page 1 GATEWAY-ECC User Manual Version 1.0 www.solaxpower.com eManual in the QR code or at http://kb.solaxpower.com/...
- Page 3 STATEMENT Copyright Copyright © SolaX Power Network Technology (Zhejiang) Co., Ltd. All rights reserved. No part of this manual may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means without the prior written permission of SolaX Power Network Technology (Zhejiang) Co., Ltd.
- Page 4 About This Manual Scope of Validity This manual is an integral part of Gateway ECC. It describes the installation, electrical connection, commissioning, maintenance and troubleshooting of the product. Please read it carefully before operating. Note: "ECC" refers to the communication gateway energy control center-WiFi. Target Group The installation, maintenance and grid-related setting can only be performed by qualified personnel who...
- Page 5 Explanation of Symbols The symbols that may be found in this manual are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, DANGER will result in death or serious injury. Indicates a hazardous situation which, if not avoided, WARNING could result in death or serious injury.
-
Page 6: Table Of Contents
Table of Contents Preface .......................1 1.1 Read this First ........................1 1.2 Safety .............................1 ECC System ....................4 2.1 ECC System Description ....................4 2.2 Highlights ..........................5 2.3 Appearance .........................6 2.3.1 Overview .........................6 2.3.2 Dimensions ......................7 2.3.3 Symbols on the Label and ECC ..............8 Interface Description ................9 3.1 Interface Layout .........................9 3.2 Terminal Use ........................10... - Page 7 4.3.2 Preinstallation check ...................25 4.4 Tools Requirement ......................26 4.4.1 Recommended Equipment ................26 4.4.2 Additionally Required Items................26 4.5 System Installation Steps ....................27 Installation ....................28 5.1 Indoor Installation ......................28 5.1.1 Installation method 1 (on the wall):..............28 5.1.2 Installation method 2 (on the platform) ............29 5.2 Outdoor Installation ......................31 5.3 APP Operation ........................31 5.3.1...
-
Page 9: Preface
Preface Read this First Gateway ECC is well designed and tested to meet all applicable states and international safety standards. However, like all electrical and electronic equipment, safety precautions must be observed and followed during the installation of the ECC to reduce the risk of personal injury and to ensure a safe installation. - Page 10 • All the product labels and nameplate on the device shall be maintained clearly visible. Hereby, SolaX Power Network Technology (Zhejiang) Co. ,Ltd. declare that Energy Control Center with model ECC supports WIFI and 4G functions. It is in conformity with the relevant union harmonization legislation: Radio Equipment Directive: 2014/53/EU.
- Page 11 Preface FCC RULES This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
Page 12: Ecc System
ECC System ECC System Description Figure 2-1 System overview diagram ECC (energy control center) ECC is a crucial component in this ECC system, functioning as a communication gateway. It gathers the operation data of the system and uploads the data to SolaXCloud, establishing a fundation for data monitoring and remote operation. -
Page 13: Highlights
ECC System Grid 220V / 230V/ 240V grid are supported. SolaXCloud SolaXCloud is an intelligent, multifunctional monitoring platform that can be accessed either remotely or through a hard wired connection. With the SolaX Cloud, the operators and installers can always view key and up-to-date data and set it remotely. -
Page 14: Appearance
ECC System Appearance 2.3.1 Overview 4G Antenna WiFi Antenna Indicator Interface Interface Type label Port Port Interface Port Figure 2-2 Apprearance... -
Page 15: Dimensions
ECC System Table 2-1 Desciption of appearance Item Description 4G Atenna To receive and transmit WiFi signal. WiFi Atenna To receive and transmit 4G signal. Indicator Show the status of the device. Type label clearly identifies the device type, serial number, Type label specific DC/AC parameters, certification, etc. -
Page 16: Symbols On The Label And Ecc
ECC System 2.3.3 Symbols on the Label and ECC Table 2-2 Description of symbols Symbol Description CE mark. The ECC complies with the requirementsof the applicable CE guidelines. FCC mark of conformity. CSA mark for UL1973 Read the enclosed documentations Do not dispose of the ECC together with household waste. -
Page 17: Interface Description
Interface Description Interface Layout Table 3-3 Interface description Number Item Description Wi-Fi antenna 1 string for connecting to the router Output voltage: 11.4 ~ 12.6 V Power Power supply adapter with round tip 4 strings for DRM including DRM0/5/6/7/8 which responds according to grid-connection needs 2 strings Ethernet... -
Page 18: Terminal Use
Interface Description Number Item Description USB port 1-string standard USB for local upgrade RS485 port-4 For use with adapter box RS485 port-3 For communication with energy storage system RS485 port-2 For Modbus to be connected with third-party hosts RS485 port-1 For communicating with ECC-PLC and wired meter 4G antenna 1 string for connecting to the router... -
Page 19: Power
Interface Description 3.2.2 Power Plug in the power adapter to power on or off ECC. The output voltage is 11.4 ~ 12.6 V. Plug the power adapter into the socket 3.2.3 There are 4 strings of DI ports for DRM including DRM0/5/6/7/8 which responds according to grid-connection needs Docking terminal... -
Page 20: Ethernet
Interface Description 3.2.4 There are 2 strings of AI ports. Docking terminal 3.2.5 Ethernet There are 3 methods of connecting ECC to router.Ethernet is the second method of connection between ECC and router in wired way. For stable communication between ECC and router, ethernet cable connection is recommended. -
Page 21: Do Port
Interface Description 3.2.6 DO port There are 2 strings of active DO ports (12 V) used for dry contact and adapter box Plug-in terminal B... -
Page 22: Rst
Interface Description 3.2.7 RST stands for the restart button. Long press the button to restart the system. 3.2.8 USB port USB port is designed for local upgrade. There is only 1 string of standard USB. 3.2.9 RS485 port-4 There are 4 strings of RS485. RS485 port-4 is used with adapter box for communication. -
Page 23: Rs485 Port-3
Interface Description NOTICE • For adapter box installation, please refer to the Quick Installation Guide or User Manual of Adapter Box. 3.2.10 RS485 port-3 There are 4 strings of RS485. RS485 port-2 is used for AC-coupling communication with energy storage system. Plug-in terminal A 0.4±.1 N·m... -
Page 24: Rs485 Port-2
Interface Description NOTICE • To increase the communication performance, we recommend using shielded twisted pairs (STP). If you choose to use STP, please strip the wire and twist it, and then connect to the GND port of the plug-in terminal A (as shown below). Twist Twist 0.4±.1 N·m... - Page 25 Interface Description NOTICE • To increase the communication performance, we recommend using shielded twisted pairs (STP). If you choose to use STP, please strip the wire and twist it, and then connect to the GND port of the plug-in terminal A (as shown below). Twist Twist 0.4±.1 N·m...
-
Page 26: Rs485 Port-1
Interface Description 3.2.12 RS485 port-1 There are 4 strings of RS485. RS485 port-1 is used with wired meters and to communicate with ECC-PLC and wired meter. Plug-in terminal A 0.4±.1 N·m NOTICE • To increase the communication performance, we recommend using shielded twisted pairs (STP). - Page 27 Interface Description Plug-in terminal A NOTICE • To connect to meter, we recommend the wire diameter ranging from 0.5-1.5 mm2 and the wire length depends on the actual installation conditions. • For meter installation, please refer to the Quick Installation Guide or User Manual of Meter.
- Page 28 Interface Description • ECC - meter - X1-Micro 2 in 1/4 in 1 X1-Micro 2 in 1 / X1-Micro 4 in 1 Electrical grid IB*-White IB-Blue Meter Load RS485-1 • ECC - ECC-PLC - A1-Micro 1 in 1 A1-Micro 1 in 1 White Black White...
-
Page 29: Antenna
Interface Description 3.2.13 4G antenna There are 3 methods of connecting ECC to router. 4G antenna is the third method of connection between ECC and router in a wireless way. 3.2.14 SIM card slot SIM card slot is applied to install SIM card. 3.2.15 TF card slot TF card slot is applied for TF card installation, thereby achieving data storage. -
Page 30: Ap Button
Interface Description 3.2.16 AP button AP is a networking button. Click the button and the hotspot will be activated for 1 hour. and the hotspot will be turned off by default after 1 hour. Click the button again to turn on it;... -
Page 31: Installation Preparation
Installation Preparation Unpacking • The ECC undergoes 100% testing and inspection before shipping from the manufacturing facility. However, transport damage may still occur. Before unpacking the ECC , please verify that the model and outer packing materials for damage, such as holes and cracks. •... -
Page 32: Selection Of Installation Location
Installation Preparation Table 4-4 Packing list Item Items Quantity 1 pc Bracket 1 pc Documents Self-tapping screw 3 pcs Expansion tube 3 pcs Docking terminal 1 pc Plug-in terminal A 3 pcs Plug-in terminal B 1 pc RJ45 terminal 2 pcs Power adapter (optional) 1 pc * Note: 1. -
Page 33: Preinstallation Check
Installation Preparation • Install all ECCs and DC connectors under the PV modules. • Avoid direct exposure to UV, rain and other harmful weather events. • Avoid electromagnetic inlterference in case of the malfunction of electronic equipment. -20°C-+60°C IP20 5-95%RH No direct sunlight No rain exposure No snow lay up... -
Page 34: Tools Requirement
Installation Preparation Tools Requirement 4.4.1 Recommended Equipment Installation tools include but are not limited to the following recommended ones. If necessary, use other auxiliary tools on site. Crimping tool Hammer drill Marker Diagonal pliers for RJ45 Torque screwdriver (Phillips head: ST4.2) Rubber mallet (Flat head: M2) Wire stripper... -
Page 35: System Installation Steps
Installation Preparation System Installation Steps Step 1 to 6 have to be done on site. Step 7 to 9 can be finished either on site or at home. Step 6 must be finished correctly to create site on SolaXCloud. 1. Install the PV modules 4. -
Page 36: Installation
Installation Indoor Installation 5.1.1 Installation method 1 (on the wall): Step 1: Check the box for the items as follows: i) ECC ii) Bracket iii) Expansion tube iv) Expansion bolt Step 2: User the bracket as a template to mark the position of the 3 holes on the wall using a marker, and adjust it even using the spirit level. -
Page 37: Installation Method 2 (On The Platform)
Installation Step 5: Place the wall bracket and use self-tapping screws to tighten the bracket. Attach ECC to the bracket. Make sure the back side of ECC is fixed well with buckles on the bracket. ST4.2 0.5 N·m NOTICE • Prior to step 6, please complete wiring process. Step 6: Plug in the power adapter to power on ECC, and then plug in the power adapter to the socket. - Page 38 Installation Step 2: Plug in the power adapter to power on ECC. 、 Step 3: Plug in the power adapter to the socket.
-
Page 39: Outdoor Installation
Installation Outdoor Installation The outdoor installation steps are the same as indoor installation. In addition, a water- proof box is needed to protect ECC. APP Operation 5.3.1 Download APP Step 1: Scan the QR code to download the monitoring APP. 5.3.2 Create an account Step 1:... -
Page 40: Create A Site
Installation XXXXXXXXX XXXXXXXXX 5.3.3 Create a site Step 1: Clike [+] in the main interface and then fill in the corresponding information to create your site. XXXXXXX XXXXXXX XXXXXXX XXXXXXX... -
Page 41: Add Device
Installation 5.3.4 Add device Step 1: Following the last step, you will enter the [Add Device] interface. Input the SN code on the device, and then click [Add Device]. XXXXXXX XXXXXXX Step 2: In this step, you will start to configurate WiFi. We provide 3 methods: WiFi mode, 4G mode and LAN mode. - Page 42 Installation XXXXXXXXXXX XXXXXXXXXXX XXXXXXXXXXX Method 2: Insert SIM card first and then select [4G] mode. Connect the WiFi of your device, and input [cmnbiot] on the APN bar and select NB-loT on the Network Deployment bar.
- Page 43 Installation XXXXXXXXXXX XXXXXXXXXXX XXXXXXXXXXX NOTICE • If you use a white SIM card, please fill [cmnbiot] in the APN column; If you use a black SIM card, please input [cmiot] in the APN column.
-
Page 44: Bind Microinverter
Installation Method 3: Insert LAN into the ethernet port to connect ECC to the routher in a wired way. 5.3.5 Bind microinverter If you need to bind microinverter, please follow steps as below. Step 1: Click a site that you need to bind microinverter, click [ ] icon, and input or scan the QR code on the microinverter. -
Page 45: Microinverter Data
Installation XXXXXXXXXXX XXXXXXXXXXX Step 2: After APP recognize the code, click [Add Device] and then [Next] until the interface pop up [Device added successfully]. XXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXX 5.3.6 Microinverter data Step 1: Click [Go to Distrib...] to configurate WiFi. Fill in your Home WiFi network and... - Page 46 Installation password, Select [Next], and connect [WiFi_XXXXXXX] (XXXXXX refers to the SN of your device). XXXXXXXXXX XXXXXXXXXXX XXXXXXXXXX Step 2: After successfully connecting to WiFi_XXXXXX, system will start to configurate WiFi automatically. Step 3: Click the specific inverter you bind in the last step to see more details of the device.
-
Page 47: On-Site Inspection
Installation 5.3.7 On-site inspection Step 1: To inspect your site, please click the site, and choose Gateway. Click [Chart], device, [Expand], [Data] or [Graphics] to see the data of your device. XXXXXXXXXXX XXXXXXXXXXX NOTICE • You can also finish this step by clicking AP button of the ECC. - Page 48 Installation...
-
Page 49: Troubleshooting And Maintenance
Troubleshooting and Maintenance LED Indicator LED indicator status Symbol LED indicator Definition Power Display the status of electricity power Local Display the local communication status communication SolaXCloud Display the communication with SolaXCloud communication Warning Warning important faults • Troubleshooting for ECC + X1-Micro 2 in 1 / 4 in 1 + meter scence Indicator Status Description... - Page 50 Troubleshooting and Maintenance Indicator Status Description ECC is connecting to the SolaXCloud; Green light steady on communication is normal The AP hotspot of ECC is activated (with Green light flashes quickly the highest priority); after configuration, (1 s) SERVE2 green light will be steady on Red light steady on Not connected to the routher Red light flashes quickly...
-
Page 51: Maintenance
Troubleshooting and Maintenance Indicator Status Description Steady off Normal; no errors Red light flashes quickly Not connected to the meter (no data ALARM (1 s) were transferred) Red light steady on ECC report error Maintenance Regular maintenance is required for the ECC. The table of “Proposal of Maintenance” below lists the operational maintenance for expressing the optimum device performance. -
Page 52: Device Replacement
Troubleshooting and Maintenance Upgrade preparation • Please check the ECC version and prepare a U disk (USB 2.0/3.0) and personal computer before upgrading. Please make sure that the format is FAT FAT 32. • Please contact our service support to obtain the firmware, and store the firmware in the U disk according to the following path. -
Page 53: Decommissioning
Decommissioning Disassembling the Gateway Refer to a. To disassembling the ECC for disassembling the ECC. Packing the Gateway • Load the ECC into the original packing material if possible. • If the original packing material is not available, you can also use the packing material which meets the following requirements: »... -
Page 54: Disposal Of The Gateway
Decommissioning • If the ECC has been stored for more than 10 years, it must be checked and tested by professionals prior to use. Disposal of the Gateway Please dispose of the ECCs or accessories in accordance with the disposal regulations for electronic waste applied at the installation site. -
Page 55: Technical Data
Technical Data 100~240 V 50/60 HZ 0.8 A AC input Power adapter 12 V 2 A DC output Ethernet 10/100 M Wi-Fi frequency range 2.4 GHz Wi-Fi EIRP power 19.5 dBm Degree of protection IP20 Operating temperature range [°C] -20°C ~ 60°C Humidity 5%~95% Dimensions [mm]... -
Page 56: Appendix
Appendix INSTALLATION MAP... - Page 57 Contact Information UNITED KINGDOM AUSTRALIA Unit C-D Riversdale House, Riversdale 21 Nicholas Dr, Dandenong South VIC 3175 Road, Atherstone, CV9 1FA +61 1300 476 529 +44 (0) 2476 586 998 service@solaxpower.com service.uk@solaxpower.com TURKEY GERMANY Fevzi Çakmak mah. aslım cd. no 88 A Am Tullnaupark 8, 90402 Nürnberg, Karatay / Konya / Türkiye Germany...
- Page 59 Warranty Registration Form For Customer (Compulsory) Name Country Phone Number Email Address State Zip Code Product Serial Number Date of Commissioning Installation Company Name Installer Name Electrician License No. For Installer Module ( If Any ) Module Brand Module Size(W) Number of String Number of Panel Per String Battery ( If Any )
- Page 60 SolaX Power Network Technology (Zhejiang) Co., Ltd. Add.: No. 288, Shizhu Road, Tonglu Economic Development Zone, Tonglu City, Zhejiang Province, 310000 P. R. CHINA Tel.: +86 (0) 571 5626 0011 E-mail: info@solaxpower.com Copyright © SolaX Power Network Technology (Zhejiang) Co., Ltd. All rights reserved. 320101080801...
Need help?
Do you have a question about the GATEWAY-ECC and is the answer not in the manual?
Questions and answers