Advertisement
Quick Links
NH1.5-Clamps
The S-5!® NH1.5 clamps, made of Aluminium,
are suitable for 1.5 inch (38mm) high Nailstrip
profiles with a base width of 12mm to 20mm.
These S-5!® NH1.5 clamps have an innovative
insert that engages the female portion of the panel
and forms to the shape of the seam to prevent
damage, while offering optimal holding strength.
The NH1.5 Clamp with two set-screws, two
M8 threads on top and one M8 stainless steel bolt,
is used for heavy-duty applications and ColorGard
snow retention.
NH1.5-Clamp is packed with 25 pcs. per box
(not on stock available)
Examples of applications: Snow guard, handrailings, walkways, rails, solar mounting, steps, satellite dishes and much more.
All S-5!® Clamps are tested on different materials and profiles by a third-party A2LA accredited US-lab - the
highest regarded in the industry - and follow strict ASTM standards. This type of test tests the clamp itself
and the connection of the clamp to the profile under test conditions. Tests made with load pulling parallel
(shear) to seam and with load pulling normal (tensile) to seam. The test results proved the outstanding
performance of the S-5!® clamps.
Please don't hesitate to contact us for more information and technical assistance.
The NH1.5-Mini with one set-screw, insert
and with a M8 thread on top are utilized in various
instances when multiple clamps are required for the
attachment of rigid objects to the seams, e.g. S-5-
PVKIT® 2.0, rail systems, walkways, cable trays, etc.
For mounting rails with screw channels underside or
beside, the NH1.5-Mini can be combined with
different adapter plates.
The S-5!® Mini clamps are now supplied without
M8x16 stainless steel screws. These screws can be
ordered separately from us. PU: 200 pieces per box.
NH1.5-Mini is packed with 40 pieces per box
NH1.5-Clamp
NH1.5-Mini
Advertisement
Summary of Contents for RoofTech S-5! NH1.5-Mini
- Page 1 NH1.5-Clamps The S-5!® NH1.5 clamps, made of Aluminium, The NH1.5-Mini with one set-screw, insert and with a M8 thread on top are utilized in various are suitable for 1.5 inch (38mm) high Nailstrip instances when multiple clamps are required for the profiles with a base width of 12mm to 20mm.
- Page 2 A sufficient number of clamps must be provided. For statically relevant clamps, a distance of at least 500mm from the end of the standing seam profile must be maintained. RoofTech and the makers of the S-5! clamps make no representations with respect to these variables. It is the responsibility of the user to verify this information, or seek assistance from a qualified design professional or stress analyst, if necessary.
Need help?
Do you have a question about the S-5! NH1.5-Mini and is the answer not in the manual?
Questions and answers