Download
Share
Print this page
  1. Manuals
  2. Brands
  3. AVAB Manuals
  4. Controller
  5. PBS-100
  6. Application notes

AVAB PBS-100 Application Notes

Hide thumbs
1
2
3
4
5

Advertisement

Quick Links

Download this manual
PBS-100 APPLICATION NOTES
PLAYBACK/RECORD CONFIGURATION
Ÿ To configure PBS as Playback Station, plug keyswitch connector to header position 1-4,
and plug indicator lamp connector to position 9-10. Indicator lamp legend should read
"CONTROL HERE".
Ÿ To configure PBS as Record Station, plug keyswitch connector to header position 5-8,
and plug indicator lamp connector to header position 11-12. Indicator lamp legend should
read "RECORD".
PLAYBACK STATION FEATURES
Playback Stations are always active to playback presets unless the following:
Ÿ Connect TERM 1 (Console Present) if PBS should be deactivated while console is active
(requires console present relay installed in main console).
Ÿ Connect TERM 2 (Terminal Indicator) if PBS should be deactivated while Terminal is
active.
Ÿ Connect TERM 1 to TERM 17 at the PBS station if KEY-ONLY access is desired for
playback functions (i.e. playback is enabled only while key is turned and held). Be certain
that Console Present is NOT also connected to TERM 1 if choosing this option.
When the key is turned and held, Playback Stations are active to playback presets
regardless of Console Present or Terminal Indicator unless the following:
Ÿ Connect TERM 14 (Backup Record Enable) to disable the keyswitch over-ride of Console
Preset and Terminal Indicator lockout features (i.e disables station when key is turned
and held). Be certain that TERM 1 is NOT connected to TERM 17 when choosing this
option; to do so would completely disable Playback Station in all situations. Note that this
feature actually enables Backup Record in order to disable the Playback Station; while
the key is turned and held any backup fader movement will record as a Backup Preset if
the system is configured for an AVAB Analog Backup console.
Note: TERM 15 (Analog Input 12) is not implemented in the PBS circuitry when configured as
a Playback Station.
RECORD STATION FEATURES
Record Stations are always active to playback presets unless the following:
Ÿ Connect TERM 1 (Console Present) if PBS should be deactivated while console is active
(requires console present relay installed in main console).
PBS_TECHNICAL.DOC Ÿ Revised 20020628
Page 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the PBS-100 and is the answer not in the manual?

Questions and answers

Summary of Contents for AVAB PBS-100

  • Page 1 Backup Preset if the system is configured for an AVAB Analog Backup console. Note: TERM 15 (Analog Input 12) is not implemented in the PBS circuitry when configured as a Playback Station.
  • Page 2 Ÿ Connect TERM 2 (Terminal Indicator) if PBS should be deactivated while terminal is active. Note: TERM 14 (Backup Record Enable) is not implemented in the PBS circuitry when configured as a Record Station. PBS_TECHNICAL.DOC Ÿ Revised 20020628 Page 2...
  • Page 3 This pinout is for DDII software release version 2.5b and above only. This pinout describes the connections between the PBS-100's on-board compression screw terminals and a female D-Sub 25 connector for termination at an AVAB DD-II dimmer (or DD-II dimmer rack), and AVAB Smartie, or PBS wallplate.
  • Page 4 This pinout is for DDII software release version 2.5b and above only. This pinout describes the connections between a DD-II dimmer (or DD-II dimmer rack) or AVAB Smartie and a PBS wallplate. This pinout also describes the interconnection cable between a PBS wallplate and a "portable"...
  • Page 5 DD-II software release 2.5 and above has a revised Analog Input scheme for Push Button Mode. These changes only affect systems with one or more PBS-100 stations currently installed. With the new scheme, Push Button "1" corresponds with Preset 1, Push Button "2" corresponds with Preset 2 and so on.