MasterCool Combo-Cool Owner's Manual
  1. Manuals
  2. Brands
  3. MasterCool Manuals
  4. Chiller
  5. Combo-Cool
  6. Owner's manual

MasterCool Combo-Cool Owner's Manual

Evaporative cooler chiller system
Hide thumbs

Advertisement

Table of Contents

PATENT PENDING
OWNER'S MANUAL
READ AND SAVE THESE INSTRUCTIONS
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Combo-Cool and is the answer not in the manual?

Questions and answers

Summary of Contents for MasterCool Combo-Cool

  • Page 1 PATENT PENDING OWNER'S MANUAL READ AND SAVE THESE INSTRUCTIONS...
  • Page 2 (one blade is wider than the other). Plug the Damaged pump, clogged water lines, COMBO-COOL chiller directly into a 120V improper installation, improper operational A.C. electrical outlet. Do not use extension range, use of water treatment chemicals, cords.
  • Page 3 DHT (sensor & housing) If you are missing any parts, or need replacement parts, call us at 800-643-8341 and we’ll place your order for you. You can also order parts online at combo-cool.com. For a list of parts see page 17.

  • Page 4: Specifications

    SPECIFICATIONS Voltage/Frequency 115V Max Watts 345W Amps Cycle Hertz 60Hz Phase 1-ph Connection 3-prong grounded Chassis Powder Coated Operational Range 32F-130F Pump Voltage 115V Pump Gallons Per Hour 285GPH CCMC-E Dimensions 17.875" Height 9.75" Width 4.425" Depth Weight 15 lbs 10 oz/7.09 kg CCMC-I Dimensions 16.625"...

  • Page 5: Installation

    INSTALLATION CCMC-E Remove the evaporative cooler's side panel (panels, if needed). See CCMC-E the manufacturer's evaporative cooler manual for instructions. OPENING (STEP 11) Locate the inside of cooler PLUG opposite of motor, pulley and belt. TOP OF COOLER (If you have the CCMC-I unit, skip to step 13.) Using a unibit or hole saw drill bit, drill a 4"...
  • Page 6 Locate the side of cooler unit). Slip the inlet hose on the small part of the "Y" on the pump with the supply water water inlet (item J). Secure the line for the media pad. small hose clip (item D). Do not let the valve touch your media Clip the bottom of the...
  • Page 7 (If you have the CCMC-E EVAPORATIVE COOLER EXTERIOR VIEW model skip to step 25.) Locate factory knock-out SCREW HOLES hole on the outside of the cabinet. Feed the DHT sensor wire (item L) through the knock-out hole. KNOCK-OUT To attach the DHT housing to the outside of the cabinet, use two (2) DHT WIRE 5/16"...
  • Page 8 CIRCULAR CONNECTORS Locate the circular connectors at the top of the CCMC box. KEYWAY Match these labels, (OR NOTCH) "DHT" and "VALVE," to PINS the wire labels. Locate the keyways (or notches) inside the COUPLINGS connectors and align the (THREADED TOGETHER) corresponding connector and pins.
  • Page 9 CAUTION: The CCMC is durable enough to be left installed during the winter, though a few precautions must be taken to ensure no water freezes in the unit or lines. COMBO-COOL PARTS Available for purchase at 1-800-643-8341 or mastercoolproducts.com DESCRIPTION...

  • Page 10: Troubleshooting

    DHT sensor failure. Check the DHT sensor cable connection to the control board, and the DHT sensor cable to the circular connector on the Combo-Cool unit. Blue LED —solid light. No power. Verify unit is plugged in and outlet is functional.
  • Page 11 HIGH TECH. LOWER TEMPS. Combo-Cool by MasterCool is simply a chiller system designed to easily install in your evaporative cooler. It uses energy efficient chilling technology to optimize water temperature. Our system incorporates a microcontroller and weather sensors to make precise changes, creating the perfect recipe for efficient and effective cooling.

Table of Contents