Advertisement
Quick Links
CYPRESS SWING STAND
INSTRUSTIONS
HARDWARE PACK
(4) 8 1/2 HEX BOLTS
(12) HEX NUTS
(24) FLAT WASHER
Made in the USA
(2) S HOOKS
STAND PARTS
The cypress swing stand ships in three boxes. Stand parts
and hardware pack contents list below are per box. Stand
parts and hardware packs from both boxes are required for
assembly.
• BOX 1: 2 LEGS AND 1 LEG BRACE
• BOX 2: 2 LEGS AND 1 LEG BRACE
• BOX 3: 2 CENTER BEAM AND 2 UPPER BRACES
SUGGESTED TOOLS
• SCREWDRIVER (to be inserted through side holes of deep
well socket tool, for use as a handle)
• 9/16" SOCKET (to hold other end while tighting bolts)
CARE INSTRUSTIONS
• Lightly sand once a year and add a coat of boiled linseed
oil to keep the cypress wood in good condition.
NOTE: TWO PERSON ASSEMBLY SUGGESTED
(8) PLASTIC CAPS TO COVER BOLT ENDS
(4) 5" HEX BOLTS
(2) 4 3/4"EYE BOLT
(1) 3"EYE BOLT
Advertisement
Summary of Contents for Hatteras Hammocks CYPRESS SWING STAND
- Page 1 CYPRESS SWING STAND STAND PARTS INSTRUSTIONS The cypress swing stand ships in three boxes. Stand parts and hardware pack contents list below are per box. Stand parts and hardware packs from both boxes are required for assembly. • BOX 1: 2 LEGS AND 1 LEG BRACE •...
- Page 2 DO NOT EXCEED LOAD LIMIT OF 450 LBS. DO NOT ALLOW CHILDREN TO USE THE SWING STAND WITHOUT DIRECT ADULT SUPERVISION. DO NOT HAVE INFANTS IN SWING STAND. Congratulations on purchasing this Cypress Swing Stand. QUESTIONS REGARDING THIS PRODUCT? Call our customer service team, 252-758-0641. WARRANTY INFORMATION: Products of The Hammock Source are guaranteed to be free of defects in workmanship and materials for up to one year after the purchase date.
Need help?
Do you have a question about the CYPRESS SWING STAND and is the answer not in the manual?
Questions and answers