Do you have a question about the GLCI26XXA A and is the answer not in the manual?
Questions and answers
Summary of Contents for Galanz GLCI26XXA A
Page 1
26-Lb. Countertop Ice Maker Owner's Manual Model GLCI26XXA#A PLEASE READ THIS MANUAL CAREFULLY BEFORE USING YOUR ICE MAKER AND KEEP IT FOR FUTURE REFERENCE.
TABLE OF CONTENTS BEFORE GETTING STARTED ................2 SPECIFICATIONS ................... 2 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY TIPS ................3 NAME OF THE PARTS ..................4 OPERATING PROCEDURES & MAINTENANCE UNPACKING YOUR ICE MAKER ..............5 CONNECTING YOUR ICE MAKER ..............5 HOW TO CLEAN .....................
BEFORE GETTING STARTED Before connecting the appliance to the power supply, let the unit stand upright for 1 hour, which will reduce the possibility of the cooling system malfunctioning due to improper handling. Clean your unit thoroughly before putting into use. (See “How to Clean”) Use the parts diagram on page 4 to insure proper positioning of internal components.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY TIPS When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and injury to persons or property. Read all instructions before using any appliance. Do not operate this or any other appliance with a damaged cord. Connect to properly polarized outlets only.
NAME OF THE PARTS 1. Cover: See through window to allow interior visibility. 2. Control panel: Easy to use, visible functions touch display setting. A) Selected ice size: small or large. B) Power indicator. C) Ice Full indicator. D) Water shortage indicator. E) Button to turn on/off the unit.
OPERATING PROCEDURES & MAINTENANCE UNPACKING YOUR ICE MAKER 1. Remove all exterior and interior packaging. Check that ice basket and ice scoop is included. If any part or accessory is missing, please contact our customer service. 2. Clean the interior with lukewarm water and a soft cloth. Remove the ice basket and wash it in warm water.
HOW TO CLEAN Remove the ice basket. 1. Pull off the drain plug from the front underside to drain out the water. 2. Clean the interior including the ice-full sensor surface, with diluted detergent, warm water and a soft cloth. 3.
USING YOUR ICE MAKER 1. Clean your ice maker thoroughly. 2. Open the cover, remove the ice basket and pour drinkable water (preferably purified water or distilled water) into tank. 3. Plug in the unit and the power indicator light will blink. 4.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Stop the ice maker, fill "ADD WATER" water, and press Lack of water. "POWER" button again indicator is on. to restart the unit. "ICE FULL" indicator Remove ice from ice Ice basket is full. is on. basket.
Page 10
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Stop the ice maker, and Ice making cycle is restart when the ice too long. blocks melt. Select the small ice size. Ice cubes stick Water temperature in Change the water in the together. inner tank is too low. reservoir.
Galanz Americas Limited Company - Product Warranty This warranty applies to products sold by Galanz Americas in the U.S. This warranty is in lieu of any other warranty and expressly applies to the individual product only. Galanz product is warrantied for one year following purchase for defects in material and workmanship.
Need help?
Do you have a question about the GLCI26XXA A and is the answer not in the manual?
Questions and answers