Download Print this page

Bio-Logic HU2284701-GK Assembly And Operating Instructions Manual

200 lb wildlife feeder

Advertisement

Quick Links

This Owner's Manual is provided and hosted by Appliance Factory Parts.
Rankam HU2284701-GK
Owner's Manual
Shop genuine replacement parts for Rankam
HU2284701-GK
Find Your Rankam Grill Parts - Select From 123 Models
-------- Manual continues below --------

Advertisement

loading
Need help?

Need help?

Do you have a question about the HU2284701-GK and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Bio-Logic HU2284701-GK

  • Page 1 This Owner's Manual is provided and hosted by Appliance Factory Parts. Rankam HU2284701-GK Owner's Manual Shop genuine replacement parts for Rankam HU2284701-GK Find Your Rankam Grill Parts - Select From 123 Models -------- Manual continues below --------...
  • Page 2 200 LB WILDLIFE FEEDER Assembly and Operating Instructions Model # HU2284701-GK 1 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 3: Pay Attention

    Wrench etc….. DANGER Your Bio-Logic Feeder is designed, engineered and constructed in a manner that makes it a rugged piece of hunting equipment that will give you years of service. This rugged construction makes your feeder physically heavy. As such, you should never attempt to assemble this feeder alone. YOU MUST HAVE A MINIMUM OF TWO (2) ADULTS FOR THE SAFE ERECTION OF YOUR FEEDER.
  • Page 4 GENERATORS, SUBSTATIONS, ETC) AND/OR TRANSMISSION EQUIPMENT (POWER LINES). FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH!  DO NOT LOAD FEED WITHOUT ANOTHER ADULT. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH! 3 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 5 PRIOR TO THE FIRST TIME OF OPERATION. ALWAYS REFER TO THE USER GUIDE OF THE BATTERY FOR DIRECTION.  THE PROPER SPACING BETWEEN THE SPIN PLATE AND THE FUNNEL IS 3/8 INCH. THIS IS VERY IMPORTANT FOR SERVICE FREE OPERATION. 4 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 6 FOR REPLACEMENT OF MISSING OR DEFECTIVE PARTS. Symbol: The following symbols will be shown in assembly procedures for indication of tightening the bolt and nut if necessary. Hand Tighten only at this time Tighten with tools at this time 5 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 7 Product Diagram TK14 TK11 TK12 TK13 6 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 8 2 pcs 2 pcs Hardware List – For Feeder Item No. Item Name Diagram Hex. Bolt 44 pcs (M8x15) Locking Nut 48 pcs (M8) Flat Washer 88 pcs (M8) Hex. Bolt 4 pcs (M6x20) 7 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 9 TK11. Funnel TK13. Mounting Bracket TK14. Feed Timer 1 pc Wing bolt 1 pc 2 pcs 1 pc Hardware List – For Timer Kit Item Item Name Diagram Hex. Bolt 10 pcs (M6x20) 8 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 10 Flat Washer 2 pcs (M6) Butterfly Nut 2 pcs (M6) Flange Nut 2 pcs (M6) Wing Bolt 1 pc 9 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 11 #B - 16 pcs #C - 32 pcs Step 2. Attach Sled Feet (#9 & #10). Tighten bolts with tool. Hardware required: #F - 4 pcs #B - 4 pcs #C - 4 pcs 10 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 12 Step 3. Attach leg assemblies in Step #1 to Hopper Body (#2). Hand tighten bolts only! Hardware required: #A – 16 pcs #B – 16 pcs #C – 32 pcs 11 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 13 Step 4. Attach Short Foot (#6) to legs. Hand tighten bolts only! Hardware required: #A – 4 pcs #B – 4 pcs #C – 8 pcs 12 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 14 Step 5. Attach Sled Foot assemblies in Step #2 to legs per below. Tighten all bolts in Step #3,4 and in this Step with tool. Hardware required: #A – 4 pcs #B – 4 pcs #C – 8 pcs 13 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 15 Step 7. Assembly of Timer Kit. Hand Tighten bolts Hardware required: TK13 #M - 2 pcs #N - 2 pcs #P - 2 pcs #Q - 2 pcs #R - 1 pc TK12 14 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 16 #M - 4 pcs Step 9. Attach Varmint Guard (#7) to hopper. TIGHTEN bolts with tool. Hardware required: #D - 4 pcs #H - 4 pcs Door of Varmint Guard aligns with door of Timer Kit 15 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 17 #C - 4 pcs #G - 2 pcs Step 11. Put the lid on hopper body and lock it. Affix the feeder to the ground with Stakes (#5). … YOUR FEEDER IS COMPLETELY ASSEMBLED, 16 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 18 DO NOT LOAD FEEDER UNTIL IT IS STANDING UP AND IN PLACE.  THE PROPER SPACING BETWEEN THE SPIN PLATE AND THE FUNNEL IS 3/8 INCH. THIS IS VERY IMPORTANT FOR SERVICE- FREE OPERATION. 17 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 19 REGULATIONS. PLEASE ALWAYS KEEP YOUR INFORMATION UP-TO-DATE AND RELIABLE. MANY STATE LAWS CHANGE AND ARE AMENDED WITHOUT NOTICE. ALWAYS DOUBLE CHECK YOUR STATE AND SPECIFIC COUNTY FEEDING LAWS REGARDING THE USE OF FEEDERS. 18 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 20 DO NOT LOAD FEEDER UNTIL IT IS COMPLETELY ASSEMBLED AND STANDING UP IN PLACE.  DO NOT LOAD THE FEEDER IF YOU FIND ANY OF PART #5 (STAKES) MISSING, DAMAGED AND/OR LOOSE. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH! 19 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 21: How To Install Battery

     CONNECTING THE BATTERY IN ANY OTHER WAY WILL PERMANENTLY DAMAGE YOUR UNIT. TAKE EXTREME CARE TO MAKE THIS CONNECTION PROPERLY. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH. 20 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 22: How To Operate The Timer

    OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: - THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. - THE DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.  THIS UNIT AROUND POWER GENERATING EQUIPMENT 21 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 23 Please contact Customer Service at Rankam (China) Manufacturing Company Limited 1-888-837-1380 Monday thru Friday 8 A.M. to 5 P.M. Pacific Standard Time or by email customerservice@rankam.com WE CAN HELP. Made in China 22 of 23 HU2284701-GK - ENG 20190425-V2.0...
  • Page 24 Follow the Customer Service Representative’s instructions exactly. If a return is necessary, it must be packed carefully and shipped prepaid. Rankam (China) Manufacturing Company Limited 18 F., New Lee Wah Centre 88 Tokwawan Road, Kowloon, Hong Kong 23 of 23 HU2284701-GK - ENG 20190425-V2.0...