Page 1
Washing machine WAWH26P9SN en Instruction Manual and Installation Instructions...
Page 2
Your new washing machine Display rules : Warning! You have chosen a Bosch washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
Intended use Intended use This appliance is intended for private ■ I n t e n d e d u s e domestic use only. Do not install or operate this ■ appliance anywhere that is liable to experience frost and/or outdoor conditions.
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. The following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■...
Safety instructions Warning Installation Risk of suffocation! Warning If allowed to play with the Risk of electric shock/fire/ packaging/plastic film or material damage/damage to packing components, children the appliance! may become caught in these or If the appliance is not installed pull them over their heads and properly, this may lead to a suffocate.
Page 8
Safety instructions The mains plug must be Warning ■ freely accessible at all times. Risk of fire/material damage/ If this is not possible, in damage to the appliance! order to comply with the The use of extension cords or relevant safety regulations, a power strips may result in fire switch (2-pole switch-off) due to overheating or short...
Page 9
Safety instructions If the water hoses are altered Warning ■ or damaged, this may result Risk of injury! in material damage or The appliance is very heavy. ■ damage to the appliance. Lifting it may result in injury. The water hoses must not be Do not lift the appliance on kinked, crushed, altered or your own.
Safety instructions If you reach into the drum Operation ■ while it is still rotating, you Warning risk injuring your hands. Risk of explosions/fire! Wait until the drum has Laundry that has been stopped rotating. pretreated with cleaning agents Warning that contain solvents, e.g.
Safety instructions Never take hold of the mains Caution! ■ plug with wet hands. Material damage/damage to When removing the mains the appliance ■ plug from the socket, always If the amount of laundry in ■ take hold of the plug itself the appliance exceeds its and never the mains cable, maximum load capacity, it...
Page 12
Safety instructions Warning Risk of injury/material damage/damage to the appliance! The use of spare parts and accessories supplied by other brands is dangerous and may result in injury, material damage or damage to the appliance. For safety reasons, use genuine spare parts and accessories only.
Environmental protection Information on energy and water ■ Environmental consumption: ~ Page 27 The displays provide information protection about the relative level of energy and water consumption in the selected Packaging/used appliance programmes. E n v i r o n m e n t a l p r o t e c t i o n The more indicator lights light up, Dispose of packaging in an the higher the programme's...
Positioning and connecting ( Mains cable Positioning and 0 Bag: connecting Installation and operating ■ instructions Included with the appliance Customer services location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the machine for transport Note:...
Positioning and connecting Safety instructions Installation surface The washing machine be stable Warning Note: so that it does not move around. Risk of injury! The installation surface must be firm The washing machine is very heavy. ■ ■ and level. Be careful when lifting/transporting Soft floors/floor coverings are not the washing machine.
Positioning and connecting Installing the appliance in a Take the hoses out of the holders. kitchenette Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate. Unscrew and remove all four transportation securing bolts with a Notes wrench (WAF 13).
Positioning and connecting Hose and cable lengths Left-hand connection ■ Right-hand connection ■ The following are available from Tip: specialist dealers/customer services: Extension for Aqua-Stop and cold ■ water supply hose (approx. 2.50 m); order no. WM Z2380, WZ 10130, CZ 11350, Z 7070X0 A longer supply hose ■...
Positioning and connecting Water inlet When the tap is open, the water flow rate is at least 8 l/min. Warning If the water pressure is higher than this, Danger of death! a pressure-reducing valve must be There is a risk of electric shock if you installed.
Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin).
Positioning and connecting Levelling Notes The mains voltage and voltage ■ Align the appliance using a spirit level. indicated on the washing machine (rating plate) are the same. Incorrect alignment may result in loud The connected load and fuse noises, vibrations and machine required are specified on the rating "movement".
Positioning and connecting Before washing for the first time The washing machine was thoroughly tested before leaving the factory. To remove any water that may be left over from the test, run the first wash cycle without any laundry. Notes The washing machine must be ■...
Positioning and connecting Transportation E.g. when moving house Caution! Risk of damage to the appliance caused by detergent/fabric softener leaking from the dispensers. Leaking detergent/fabric softener can Before switching on the appliance prevent the appliance from working again: correctly, e.g. due to damage to the Notes electronics.
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Connect the mains Open the door. To switch on, press Select a plug. Turn on the the # button.
Getting to know the appliance Getting to know the appliance Washing machine G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer ~ Page 41 Operating/display panel Door with door handle 9S Open the door...
Getting to know the appliance Control panel All the buttons are sensitive P Child lock (E 3 sec.) Note: (except for the main switch) and only Activate/deactivate to prevent the need to be pressed lightly. set functions from being changed accidentally: To do this, press the Ready in (ñ) ( Main switch...
Page 26
Getting to know the appliance h The Remote start } button enables the programme to be started remotely on the appliance via the Home Connect app. Remote start remains enabled for 24 hours after it has been activated. It is automatically deactivated if you do not start the programme via the Home Connect app during this...
Getting to know the appliance Display panel Ready in time ■ e.g. 2:30; Programme duration depends on the programme selection in h:min (hours:minutes) End time preselection ■ 1 - 24 h; Programme ends after ... h (h = hours) Basic dosage ■...
Page 28
Getting to know the appliance Further information Further information Childproof lock activated Programme progress: is continu- Prewash ously lit Wash Childproof lock activated, pro- is flashing gramme selector adjusted Rinse à Foam detection function: Spin ~ Page 41 - 0 - Programme end Å...
Laundry Some examples of soiling levels can Laundry be found on ~ Page 30 – Light: Do not prewash, select the P repare the laundry SpeedPerfect setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –...
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note...
Overview of programmes Overview of programmes Programmes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/Type of laundry/Instructions Settings Programme name Max. load Brief explanation of the programme and the fabrics for which it Temperature that can be selected is suitable.
Page 32
Overview of programmes Programme/Type of laundry/Instructions Settings f Easy-Care Max. 4 kg Synthetic or blended fabrics Ž ... 60 °C $, 0 - 1200 rpm EcoPerfect, SpeedPerfect, Prewash (T), Water plus (Z) Detergent è, fabric softener è o Mix Max. 4 kg Mixed load of cottons and synthetic fabrics Ž...
Page 33
Overview of programmes Programme/Type of laundry/Instructions Settings ' Rinse / 0 Spin / [ Drain Combined extra programme for rinsing and spinning the laundry, and draining the rinsing water $, 0 - 1600** rpm The Water plus (Z) button is activated at the factory for Note: .
Page 34
Overview of programmes Programme/Type of laundry/Instructions Settings *** Allergy Plus ; Max. 6,5 kg Hard-wearing fabrics made of cotton or linen Ž - 60 °C Note: . Particularly suitable for strict hygiene requirements or $, 0 - 1600** rpm particularly sensitive skin thanks to the extended wash cycle at a EcoPerfect, SpeedPerfect, defined temperature, higher water level and extended rinse cycle.
Page 35
Overview of programmes Programme/Type of laundry/Instructions Settings *** Sports / Fitness Max. 2 kg Sportswear and leisurewear made from microfibre fabrics Ž - 40 °C Notes $, 0 - 800 rpm Laundry must not be treated with fabric softener. ■ EcoPerfect, SpeedPerfect, Before washing, clean the detergent drawer thoroughly (all ■...
Overview of programmes Programme/Type of laundry/Instructions Settings *** Auto. Intensive Max. 6 kg More intensive treatment of the laundry; 60 °C the degree of soiling and the type of fabric are automatically $, 1400 rpm detected, and the washing sequence and intelligent dosing are adjusted accordingly.
Programme default settings The maximum speed that can be set Programme default depends on the model and programme that has been selected. settings Ready in The default programme settings are P r o g r a m m e d e f a u l t s e t t i n g s displayed in the display panel after (ñ) selecting the programme.
Programme default settings i-DOS settings Your washing machine has an intelligent dosing system for liquid detergent and fabric softener. The washing machine doses your detergent and fabric softener automatically in most programmes. ~ Page 31 The following have been preset at the factory: i-DOSw : ¨...
Additional programme settings Water plus Additional programme settings Higher water level and additional rinse cycle for particularly sensitive skin and/ An overview of all additional settings, A d d i t i o n a l p r o g r a m m e s e t t i n g s which can be selected depending on or for areas with very soft water.
Operating the appliance The indicator light for the i-DOS ■ Operating the settings, if intelligent dosage has been selected appliance Information on water and energy ■ consumption Preparing the washing In appliances with a drum light: O p e r a t i n g t h e a p p l i a n c e machine The drum is lit after switching on the appliance, after opening and closing the...
Operating the appliance Measure and add detergent Select additional programme and care products settings The washing machine doses your By selecting additional settings, you can detergent and fabric softener better adapt the washing process to automatically in most programmes. your items of laundry. The intelligent dosage has been preset The settings can be selected or at the factory for all programmes in...
Operating the appliance Child lock Notes Do not leave the door open for too ■ (E 3 sec.) long when adding laundry as water from the laundry may leak out. You can lock the washing machine to For safety reasons, the door remains prevent the functions you have set from ■...
Intelligent dosing system Programme end Intelligent dosing - 0 - and ÿ appear in the display panel. system The A button indicator lamp is off. Intelligent dosing system in Removing laundry/switching I n t e l l i g e n t d o s i n g s y s t e m the detergent drawer off the appliance i-DOS Intelligent Dosing system...
Intelligent dosing system Initial use/filling the dispensers Refer to the manufacturer's instructions when choosing your detergent and fabric softener. We recommend the use of standard, universal and colour liquid detergents for all machine-washable, Close the lid(s). coloured fabrics made of cotton or Slowly push the detergent drawer in synthetic materials.
Intelligent dosing system Everyday use Topping up the detergent/ fabric softener: Indicator lights in the display panel: If the indicator light for the selected intelligent dosage flashes, this means that the amount of detergent or fabric softener in the dispenser is below the minimum fill level.
Intelligent dosing system Below is an example of detergent Changing the basic dosages: dosages on a packaging label: Press the corresponding i-DOS button (w or i) for approx. 3 Degree of seconds. The preset basic dosage soiling → will appear in the display panel. Water Set the required basic dosage using hardness ↓...
Page 47
Intelligent dosing system Caution! Damage to the appliance Cleaning agents and agents for pretreating laundry (e.g. stain removers, prewash sprays, etc.) may cause damage if they come into contact with the surfaces of the washing machine. Do not allow these agents to come into contact with the surfaces of the washing machine.
Home Connect You cannot use the ■ Home Connect Home Connect app to make changes while the appliance is in T his appliance is Wi-Fi enabled and can operation. You will be able to use the H o m e C o n n e c t be controlled remotely via a smartphone Home Connect app to see any or tablet PC.
Home Connect If a connection could not be Press the Start button to connect. † Note: established, “§§ (fault) will appear on will flash on the display panel. the display panel. Check whether your The appliance will now set up its appliance is in range of your home own Wi-Fi network with the name network.Try connecting automatically...
Home Connect functionality meets the basic requirements and other relevant provisions of the Directive 1999/5/EC. A detailed R&TTE Declaration of Conformity can be found online at www.bosch-home.com among the additional documents on the product page for your appliance.
Appliance settings Changing the signal volume Appliance settings Use the Ready in + or - button to You can change the following settings: change the following settings at the A p p l i a n c e s e t t i n g s corresponding programme selector The volume of the buttons and the ■...
Sensors Sensors A utomatic load sensing S e n s o r s Depending on the type of fabric and load, the automatic load sensing function optimally adjusts the water consumption and programme duration in each programme. Unbalanced load detection system The automatic unbalanced load detection system detects imbalances...
Cleaning and maintenance Machine housing/control Cleaning and panel maintenance Wipe the housing and the control ■ Warning panel with a soft, damp cloth. C l e a n i n g a n d m a i n t e n a n c e Remove the detergent residue Danger of death! ■...
Cleaning and maintenance i-DOS detergent draw and its The detergent drawer can be removed completely to allow you to housing clean to dispensers after you have emptied them. Emptying the dispensers: a) Empty the dispensers before The dispensers have emptying removing the drawer.
Cleaning and maintenance – Protect the rear drawer connector Turn off the water tap so that no against water, detergent or fabric- more water can flow in and has to be softener residue; if necessary, drained via the drain pump. clean the outer surfaces with a Switch off the appliance.
Cleaning and maintenance Put the service flap back on, lock it Filter in the water supply into place and close it. blocked First, reduce the water pressure in the supply hose: Turn off the tap. Select any programme (except Rinse/Spin/Empty). Press the A button.
Faults and what to do about them. Information on the display panel Indicator Cause/remedy - P - and ÿ The door is unlocked. It is possible to add laundry. - P - The temperature is too high. Wait until the temperature drops. ■...
Faults and what to do about them. Faults and what to do about them. Faults Cause/remedy Water is leaking from the Attach the drain hose correctly or replace it. ■ machine. Tighten the threaded joint on the supply hose. ■ The appliance is not filling Have you pressed the A button? ■...
Page 62
Faults and what to do about them. Faults Cause/remedy The programme is taking Not a fault – the unbalanced load detection system is adjusting an ■ longer than usual. imbalance by repeatedly redistributing the laundry. Not a fault – the foam detection system is active – a rinse cycle has been ■...
Page 63
Faults and what to do about them. Faults Cause/remedy The display panel/ Has there been a power failure? ■ indicator lights do not Have the fuses blown/has the circuit breaker tripped? Switch on the ■ work while the appliance circuit breaker/replace the fuses. is running.
After-sales service After-sales service If you cannot rectify a fault yourself, A f t e r - s a l e s s e r v i c e contact customer services. ~ Cover page We will always find an appropriate solution in order to avoid unnecessary visits by engineers.
Consumption rates Consumption rates Energy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy Water Programme consumption* consumption*...
Technical data Efficiency test programmes for cotton fabrics The following programmes (standard programmes, indicated by ü) are suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption. Standard programmes for cottons in accordance with Regulation (EU) no. 1015/2010 Programme + temperature Load Approximate programme...
Aqua-Stop warranty Aqua-Stop warranty Only for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a...
Page 68
0344 892 8979 (Calls charged at local or mobile rate.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. Robert Bosch Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY *9001294283*...
Need help?
Do you have a question about the WAWH26P9SN and is the answer not in the manual?
Questions and answers