Subscribe to Our Youtube Channel
Related Manuals for Sea Eagle EZLite 10
Summary of Contents for Sea Eagle EZLite 10
- Page 1 EZLite 10 Kayak ™ with EZ-In FlexBrace Pedals Instruction & Owner’s Manual For video instructions visit SeaEagle.com/Instructions Sea Eagle Boats Inc. 19 N. Columbia Street, Suite 1 Port Jefferson, NY 11777 1-800-748-8066 May 2024...
- Page 2 Some boat specifications may be needed for registration, these can be found on the MSO and on page 4 of this document. For Sea Eagle owners who purchased their boat from one of our dealers or affiliates, a copy of the Bill of Sale cannot be provided by Sea Eagle, it must be obtained from the dealer or affiliate, but Sea Eagle can supply a replacement MSO.
- Page 3 Each Sea Eagle has a safety summary we call Boating Safety Basics printed on it. Please follow these suggestions and use good boating safety practices. In addition to the basics, we suggest you have a reasonable swimming ability and know that it is safer to go boating with a buddy.
- Page 4 Right of Way: Stay out of boat channels whenever possible. Be prepared to yield right of way to larger boats especially if the oncoming boat has structures such as cabins or open hatches that limit visibility of the water ahead. OPERATING YOUR SEA EAGLE EZLite™ 10 - Inflatable Kayak Made Entirely Of Woven Drop Stitch Material! Woven Drop Stitch material is a new kind kind of drop stitch material using flat threads that are woven rather than knitted.
- Page 5 CAUTION: Avoid damaging the boat. Do not drag a Sea Eagle boat over abrasive surfaces such as parking lots and concrete boat ramps. Do not scuff a folded boat on an abrasive surface, protruding folds or creases can be damaged. Carry or wheel your Sea Eagle from your vehicle to the setup point, and then into the water when assembled.
- Page 6 5-10 psi. Do not exceed twisting the collar into the 10 psi. threaded opening until hose is tight (about 1/8 turn). Sea Eagle Boats Inc. 19 N. Columbia Street, Ste1, Port Jefferson, NY 11777 • 1-800-748-8066 • Staff@SeaEagle.com...
- Page 7 TBS the locking hook. provides great lumbar support with an 18” high back rest. Sea Eagle Boats Inc. 19 N. Columbia Street, Ste1, Port Jefferson, NY 11777 • 1-800-748-8066 • Staff@SeaEagle.com...
- Page 8 To deflate seat, unscrew the valves to allow air to escape. Sea Eagle Boats Inc. 19 N. Columbia Street, Ste1, Port Jefferson, NY 11777 • 1-800-748-8066 • Staff@SeaEagle.com...
- Page 9 Sea Eagle Boats Inc. 19 N. Columbia Street, Ste1, Port Jefferson, NY 11777 • 1-800-748-8066 • Staff@SeaEagle.com...
-
Page 10: Cleaning & Protecting
This will place the skeg base in a flat position, which will keep the base from getting warped. Sea Eagle Boats Inc. 19 N. Columbia Street, Ste1, Port Jefferson, NY 11777 • 1-800-748-8066 • Staff@SeaEagle.com... -
Page 11: Troubleshooting
If valve opens and air rushes out when removing adapter, pull on hose then twist adapter to left. Sea Eagle Boats Inc. 19 N. Columbia Street, Ste1, Port Jefferson, NY 11777 • 1-800-748-8066 • Staff@SeaEagle.com... - Page 12 PVC patch is sufficient for patches and PVC glue. repairs of this type. Repair kits also include a valve tool. Sea Eagle Boats Inc. 19 N. Columbia Street, Ste1, Port Jefferson, NY 11777 • 1-800-748-8066 • Staff@SeaEagle.com...
- Page 13 Allow to dry 15 minutes. Glue must be dry to the touch. If glue layer is thin, apply second coat, allow to dry 15 minutes. Sea Eagle Boats Inc. 19 N. Columbia Street, Ste1, Port Jefferson, NY 11777 • 1-800-748-8066 • Staff@SeaEagle.com...
-
Page 14: Optional Accessories
Set pressure Monday to Friday from 9AM to 5PM, EST. to not more than psi. Press power button to start. Pump turns off automatically. Sea Eagle Boats Inc. 19 N. Columbia Street, Ste1, Port Jefferson, NY 11777 • 1-800-748-8066 • Staff@SeaEagle.com...
Need help?
Do you have a question about the EZLite 10 and is the answer not in the manual?
Questions and answers