Summary of Contents for Barton DELUXE 95007
- Page 4 50 in /127 cm and 50 in /127 cm 50 in /127 cm 50 in /127 cm...
- Page 5 M6x12 M5x12 KK x 9 HH x 9 AA x 8 pcs BB x 8 pcs CC x 4 pcs DD x 10 pcs MM x 3 JJ x 3 LL x 3 NN x 6 II x 3...
- Page 6 STEP 1 Flip the tank housing (H) upside down and attach the wheel assembly (J) to the base of the tank housing (H) using 2pcs M8 x 16 screws (AA) and M8 nuts(BB). STEP2 Assemble the burner(G) on tank (H) with screw(CC) and Nut(DD). STEP3 Remove the 3 preassembled screws(EE) from the top of the burner (G).
- Page 7 STEP 4 STEP6 Place the glass tube (E) into the top of the glass tube ring (F). Assemble the reflector(A+B) with screws(KK)9pcs and Nuts(HH)9pcs. STEP7 Assemble the 3pcs M8X65 double head screw(LL) on the Heat Insulation plate(C). STEP 5 Attach the 3 mesh guards (F) onto the hooks at the top of the burner (G), attach the 3pcs M5 nuts(DD) at the bottom of the mesh guard(F).
- Page 8 STEP9 Assemble the reflector with 3pcs M8 nuts(MM). STEP10 Attach the anchoring arms (FF) onto the base of the tank housing (D) using 6 M6 x 12 screws (BB) and 6 M6 nuts (DD).
- Page 11 This appliance shall be used only in a well- ventilated space and shall not be used in a building, garage or any other enclosed area. This appliance may be installed with shelter no more inclusive than: 1. With walls on all sides, but with no overhead cover.
Need help?
Do you have a question about the DELUXE 95007 and is the answer not in the manual?
Questions and answers