Download Print this page
Storkcraft FORREST 03662-31 YB Series Manual

Storkcraft FORREST 03662-31 YB Series Manual

2- drawer changing chest w/baskets

Advertisement

Available languages

Available languages

Quick Links

Adult assembly required. Small parts may
present choking hazard prior to assembly.
Enclosed please find the simple step-by-step instructions
to help you quickly assemble your product. Before you
begin we recommend that you follow the steps below:
1. Please read the instructions thoroughly
2. Identify all parts and hardware
3. You may need to provide the following tools: Philips
Head screw driver, Flat head screw driver, Hammer.
Do Not Use Power Drills or Drivers
Keep these instructions for future use.
To protect your parts during assembly please place them on a soft
surface. To clean surface use only water on a damp cloth. Do not
use window cleaners or cleaning abrasives as it will scratch the
surface and could damage the protective coating.
To register your product for important safety alerts and updates
to your product please visit www.storkcraft.com and click on
Product Registration.
Made in Malaysia/
Fabriqué en Malaysia/
Hecho en Malaysia
FORREST 2- DRAWER CHANGING CHEST W/BASKETS
FORREST Chiffonnier a 2 Tiroirs
Cajonera de 2 cajones FORREST
Doit être assemblé par un adulte.
Les petites pièces peuvent présenter un
risque d'étouffement avant l'assembla ge.
Veuillez trouver ci-joint les simples instructions, étape par étape,
pour vous aider à rapidement assembler votre produit. Avant de
commencer, nous vous recommandons de suivre les étapes
ci-dessous:
1. Veuillez lire les instructions attentivement
2. Identifier toutes les pièces et le matérie
3. Vous devrez peut-être fournir les outils suivants:
Philips tournevis, tournevis à tête plate, marteau.
Ne pas utiliser de perceuse out outils électrique
Conservez ces instructions pour
une utilisation ultérieure.
Pour protéger vos pièces lors de l'assemblage veuillez placezles
sur une surface souple. Pour nettoyer la surface souple.
Pour nettoyer la surface de l'eau sur un chiffon humide. Ne pas
utiliser de nettoyants ou de nettoyage abrasifs comme il ne fera
qu'égratigner la surface et pourrait endommager le revêtement
de protection.
Pour enregistrer votre produit afin de recevoir des alertes de
sécurité et des mises à jour importantes relatives à
votre produit, veuillez visiter le site www.storkcraft.com, puis
cliquer sur Enregistrement de produits.
Se requiere ensamblaje por un adulto.
Las pieza pequeñas pueden presentar
un peligro de asfixia antes de instalarlas
Adjunto encontrará instrucciones sencillas paso a paso para
ayudarle a ensamblar rápidamente su producto. Antes de
empezar le recomendamos que siga los siguientes pasos:
1. Por favor leer detenidamente las instrucciones
2. Identificar todas las piezas y herrajes
3. Necesitará las siguientes herramientas (no incluidas):
Destornillador de cruz, Destornillador plano Martillo
No utilice destornilladores eléctricos
Guarde estas instrucciones para uso futuro.
Para proteger las piezas durante el montaje por favor,
colóquelos sobre una superficie blanda. Para limpiar l
superficie, usar sólo agua sobre un paño húmedo
Para registrar su producto a fin de recibir importantes alertas
actualizaciones de seguridad, visite www.storkcraft.com y haga
clic en Registro de Productos (Product Registration).
1
Model /
Modele No /
Numéro de modèle
03662-31 -YB
COLOR / COULEUR / COLOR
ID7321
Sep. 2020

Advertisement

loading
Need help?

Need help?

Do you have a question about the FORREST 03662-31 YB Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Storkcraft FORREST 03662-31 YB Series

  • Page 1 To register your product for important safety alerts and updates utiliser de nettoyants ou de nettoyage abrasifs comme il ne fera to your product please visit www.storkcraft.com and click on qu’égratigner la surface et pourrait endommager le revêtement Product Registration.
  • Page 3: Notes On Assembly

    - Use of a vaporizer near furniture will cause wood to swell and finish to peel. Distribué par Storkcraft Manufacturing Inc. 3993 Howard Hughes Parkway, Unit# 250 T: 1 877 274 0277 | E: customercare@storkcraft.com | Twitter @Storkcraft Las Vegas, NV, USA. 89169...
  • Page 4 - Utilisation d’un vaporisateur près du meuble pourrait causer le bois de gonfier et le fini de pelée Distribué par Storkcraft Manufacturing Inc. 3993 Howard Hughes Parkway, Unit# 250 T: 1 877 274 0277 | E: customercare@storkcraft.com | Twitter @Storkcraft Las Vegas, NV, USA. 89169...
  • Page 5 - El uso de un vaporizador cerca de los muebles hará que la madera se hinche y el acabado se descarapele. Distribué par Storkcraft Manufacturing Inc. 3993 Howard Hughes Parkway, Unit# 250 T: 1 877 274 0277 | E: customercare@storkcraft.com | Twitter @Storkcraft Las Vegas, NV, USA. 89169...
  • Page 6 ASSEMBLY INSTRUCTIONS / INSTRUCTIONS D’ASSEMBLAGE / INSTRUCCIONES DE ENSAMBLAJE HOW TO USE THE CAMLOCK BOLT(-2-) AND THE CAMLOCK(-1-) EXEMPLE D’UTILISATION (BOULON CAMLOCK(-2-) RACCORD CAMLOCK(-1-)) EJEMPLO DE UTILIZACIÓN (CAMLOCK(-2-) TORNILLO CAMLOCK(-1-) Ç ESPAÑOL Fully insert the “Camlock Bolt Insérer jusqu’au fond le «boulon camlock à Introduzca el “Tornillo camlock -2-”...
  • Page 7 Identifying the parts / Identification des pièces / Identificación de piez Dresser Parts / Pièces du Chiffonnier / Piezas De La Cajonera MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT. ASSUREZ-VOUS QUE TOUTES LES PIÈCES PRÉLASSÂMES SONT BIEN AJUSTÉES. ASEGÚRESE DE QUE TODAS LAS PIEZAS PRE-ENSAMBLADAS ESTÉN APRETADAS. (G) Left side/Côté...
  • Page 8 Identifying the parts / Identification des pièces / Identificación de piez Drawer Parts / Pièces du Chiffonnier / Piezas De La Cajonera MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT. ASSUREZ-VOUS QUE TOUTES LES PIÈCES PRÉLASSÂMES SONT BIEN AJUSTÉES. ASEGÚRESE DE QUE TODAS LAS PIEZAS PRE-ENSAMBLADAS ESTÉN APRETADAS. (A) Drawer back/Arrière de tiroir/ Panel trasero para cajón x2 (B) Drawer left side/ Côté...
  • Page 9 Identifying the parts / Identification des pièces / Identificación de piez HARDWARE/ Quincailleries / HERRAJE X 36 X 50 PH8X1-1/2” M6 X 30mm M4 Allen Key/ Camlock Bolt Screw / Vis / Tornillo Liave Allen/ Wood Dowel/ Boulon Camlock Clef Allen Cheville en Bois/ Tornillo Camlock Pasador de Madera...
  • Page 10 ASSEMBLY INSTRUCTIONS / INSTRUCTIONS D'ASSEMBLAGE / INSTRUCCIONES DE ENSAMBLAJE Left side/ Côté guache/ Right side/ Lateral izquierdo Côté droit/ Lateral derecho L X 2 - Insert 2 (X26) into G, H, M, I, L(X2), R & S...
  • Page 11 ASSEMBLY INSTRUCTIONS / INSTRUCTIONS D'ASSEMBLAGE / INSTRUCCIONES DE ENSAMBLAJE X 30 Right side/ Côté droit/ Left side/ Lateral derecho Côté guache/ Lateral izquierdo L X 2 - Insert 2 (X 30) into G, H, M, I, L(X2), R & S...
  • Page 12 ASSEMBLY INSTRUCTIONS / INSTRUCTIONS D'ASSEMBLAGE / INSTRUCCIONES DE ENSAMBLAJE - Insert 4(x30) into G, H, J, P, K , Q & N.
  • Page 13 ASSEMBLY INSTRUCTIONS / INSTRUCTIONS D'ASSEMBLAGE / INSTRUCCIONES DE ENSAMBLAJE - With 6(x8 ), screw 9CR(x2) into H Step1 Step2 Step1 9CR X2 Step1 10CL 10CL 10CL Step1 Step2 Step1 10CL X2 - With 6(x8), screw Step1 10CL(x2) into G...
  • Page 14 ASSEMBLY INSTRUCTIONS / INSTRUCTIONS D'ASSEMBLAGE / INSTRUCCIONES DE ENSAMBLAJE - Fit the Left side frame and Right side frame - Insert J & P into G - Insert K & Q into H - Tighten right 5 little more than half turn correct/ incorrect/ LOCK...
  • Page 15 ASSEMBLY INSTRUCTIONS / INSTRUCTIONS D'ASSEMBLAGE / INSTRUCCIONES DE ENSAMBLAJE - Insert L (X 2) into Q - Insert S ,M , I & R into H - Tighten right 5 little more than half turn correct/ incorrect/ LOCK to lock them together correcto incorrecto...
  • Page 16 ASSEMBLY INSTRUCTIONS / INSTRUCTIONS D'ASSEMBLAGE / INSTRUCCIONES DE ENSAMBLAJE - Insert Left side into S, L(x2), I, M & R - Tighten right 5 little more than half turn to lock them together correct/ incorrect/ LOCK correcto incorrecto L X 2...
  • Page 17 ASSEMBLY INSTRUCTIONS / INSTRUCTIONS D'ASSEMBLAGE / INSTRUCCIONES DE ENSAMBLAJE Insert N into G, H , L & S - Tighten right 5(X4) little more than a half turn on G and H to lock them together. correct/ incorrect/ LOCK correcto incorrecto Insert 19 (x2) into S and N to attach them together...
  • Page 18 ASSEMBLY INSTRUCTIO NS / INSTRUCTIONS D'ASSEMBLA GE / INSTRUCCIONES DE ENSAMBLAJ E Required/Requis/Requerido - Make sure the unit is level (squared). - In beginning by the corners, nail O to G, H, L with 13(x21) Pivot Line Pivot Line Pivot Line...
  • Page 19 ASSEMBLY INSTRUCTIONS / INSTRUCTIONS D'ASSEMBLAGE / INSTRUCCIONES DE ENSAMBLAJE B X 2 C X 2 A X 2 E X 2 - Insert 2 (X20) into A(x2), B(x2), C(x2), F(x2) B X 2 C X 2 E X 2 - Insert 5(X9) into B(x2), C(x2), F(x2)
  • Page 20 ASSEMBLY INSTRUCTIONS / INSTRUCTIONS D'ASSEMBLAGE / INSTRUCCIONES DE ENSAMBLAJE - Insert 4(X6) into E (X2). E X 2 B X 2 A X 2 F X 2 C X 2 - Insert B(x2) and C(x2) into A(x2) ,Screw 1(x4) through A(x2) into A(x2) - Insert F(x2) into A(x2) ,Screw 19(x2) through A(x2) into A(x2)
  • Page 21 ASSEMBLY INSTRUCTIONS / INSTRUCTIONS D'ASSEMBLAGE / INSTRUCCIONES DE ENSAMBLAJE - Insert D(X2) into A,B,C - Insert E(X2) into A,B,F&D LOCK correct/ incorrect/ - Tighten right 5 little more than half turn correcto incorrecto to lock them together - Screw 7(x8) through E(x2) into 8(x4). (2 drawers)
  • Page 22 ASSEMBLY INSTRUCTIONS / INSTRUCTIONS D'ASSEMBLAGE / INSTRUCCIONES DE ENSAMBLAJE - With 6(x12), screw 11DR(x2) on C and 12DL(x2) on B 11DR 11DR 12DL 12DL 12DL...
  • Page 23 ASSEMBLY INSTRUCTIONS / INSTRUCTIONS D'ASSEMBLAGE / INSTRUCCIONES DE ENSAMBLAJE...
  • Page 24 ASSEMBLY INSTRUCTIONS / INSTRUCTIONS D'ASSEMBLAGE / INSTRUCCIONES DE ENSAMBLAJE - Insert 2(X4) into T - Insert 18(X4) into U - Insert T & U into V & W using screw 19(X2)
  • Page 25 ASSEMBLY INSTRUCTIONS / INSTRUCTIONS D'ASSEMBLAGE / INSTRUCCIONES DE ENSAMBLAJE - Put topper on top of chest - Screw 19(X3) through T into N WALL STUD SAFETY BRACKET INSTRUCTIONS Montant du mur Instruction pour les crochets de sécurité MONTAJE PARA PARED INSTRUCCIONES DEL SOPORTE DE SEGURIDAD...
  • Page 26 WALL STUD SAFETY BRACKET INSTRUCTIONS Bracket Safety Strap 2" Wood Screw " Wood Screw Tipping can injure young children. Use of this safety hardware is highly recommended. This safety improper use..Frame below to top with the short the 2"screw provided: screws provied: .
  • Page 27 Montant du mur Sangle de sécurité Crochet Vis à bois 2’’ Vis à bois ’’ Étape 3 ..à l’aide de la vis a bois 2’’ inclus: ..Il est recommandé...
  • Page 28 MONTAJE PARA PARED INSTRUCCIONES DEL SOPORTE DE SEGURIDAD Soporte Tornillo para madera Tornillo para Correa de seguridad de 2" madera de " IMPORTANTE: Una caída puede lesionar a los niños pequeños. Se recomienda el uso de esta herramienta de seguridad. Esta herramienta de seguridad, cuando se instala correctamente, puede proporcionar protección en los muebles contra una inesperada caída accidental de los muebles debido al uso incorrecto.
  • Page 29 Hours of Operation: 6:30 am - 4:00 pm PST / 9:30 am- 7:00 pm EST II. WARRANTY SERVICE: - Mon to Fri Storkcraft will replace parts or products, at its sole option, from any defective product. Service under this Warranty shall be rendered in the manner deemed appropriate by Storkcraft in its own judgment, and Storkcraft may, at its sole discretion, require consumer to mail or ship items or products.
  • Page 30 Aucun agent, employé, Storkcraft et / ou ses agents peuvent: (a) exiger une preuve d'achat revendeur, ni aucune autre personne ou entreprise ne sera autorisé...
  • Page 31 Ningún agente, empleado, distribuidor, ni otra persona de usuario o producto, anuncios y comunicaciones (impreso o bajo esta garantía, Storkcraft y/o sus agentes podrán : a) exigir la interpretada y se regirá por las leyes del país, estado o provincia presentación de la prueba de compra por parte del consumidor...