Table of Contents
Advertisement
Quick Links
Ampcontrol Pty Ltd – ABN 28 000 915 542
Dongle Programmer USER MANUAL
MAG-351 Version 1 – April 2024
DONGLE PROGRAMMER
180490
User Manual
Version: 1, April 2024
Designed and manufactured in Australia by Ampcontrol Pty Ltd
Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version
Page 1 of 10
Advertisement
Table of Contents
Summary of Contents for Ampcontrol 180490
- Page 1 Dongle Programmer USER MANUAL MAG-351 Version 1 – April 2024 DONGLE PROGRAMMER 180490 User Manual Version: 1, April 2024 Designed and manufactured in Australia by Ampcontrol Pty Ltd Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 1 of 10...
- Page 2 The note symbol highlights key information. Please share these notes with other operators. ENVIRO The enviro (environmental) symbol highlights areas which may have an impact on the surrounding fauna and/or flora. Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 2 of 10...
- Page 3 MAG-351 Version 1 – April 2024 Copyright Notice The equipment described in this document is the property of AMPCONTROL PTY LTD. It is furnished under a license agreement and is to be used only in accordance with the terms of the agreement.
-
Page 4: Table Of Contents
Figure 1: Dongle Programmer (180490) ....................7 Figure 2: Dongle Blank (179345) ......................7 1 VERSION HISTORY Software Version History Version Release Date Changes April 2024 FW at Release Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 4 of 10... -
Page 5: Safety And Other Warnings
Persons responsible for installation, maintenance, or operation, must observe the following instructions: 2.1.1 Intended Use of Equipment The dongle programmer is intended to be used to pre-configure setting dongles used within Ampcontrol equipment. Incorrect operation may result in incorrect setting configurations or incorrect settings being selected. -
Page 6: Receiving And Storage
Equipment that is found to be damaged or has been modified away from its published specification must not be used. Please contact Ampcontrol if the equipment is suspected to be different than that ordered or if it does not match the published specifications. -
Page 7: Product Description
4 PRODUCT DESCRIPTION 4.1 Overview The Ampcontrol Dongle Programmer is designed to provide the operators the ability to apply configuration files to dongles as needed without the need to custom order a specific dongle. The programmer provides the ability to read, save, load and configure setting configurations. -
Page 8: Software
5.1 Home Page Overview The main page of the HMI provides a summary of the selected configuration settings (1) as well as all of the available tools (2). Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 8 of 10... -
Page 9: Setting Options
Dump: Saves the configuration file directly to a file without loading into the viewing window. 5.2.3 Info (3) About: Provides details of the programmer including supported products and version information. Logs: Provides log files of the programmer utilisation Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 9 of 10... -
Page 10: Disposal
179345 Dongle - Blank Find Out More For more information on this product, contact Ampcontrol Customer Service on +61 1300 267 373 or customerservice@ampcontrolgroup.com or visit the Ampcontrol website: www.ampcontrolgroup.com Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version...
Need help?
Do you have a question about the 180490 and is the answer not in the manual?
Questions and answers