Tranberg TEF 9204 User Manual

Tranberg TEF 9204 User Manual

Stair heater

Advertisement

Subject to change without prior notice
R. Stahl Tranberg AS
E
info@stahl-tranberg.com
Main office: Strandsvingen 6
Office Oslo: Luhrtoppen 2
TUM6410
|
stahl-tranberg.com
|
N-4032 Stavanger
|
Norway
| T
+47 51 57 89 00
|
N-1470 Lørenskog
|
Norway
| T
+47 24 08 44 10
TEF 9204
STAIR HEATER
USER MANUAL
IMPORTANT
Read this instruction carefully before installing the
product
| F
+47 51 57 89 50

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TEF 9204 and is the answer not in the manual?

Questions and answers

Summary of Contents for Tranberg TEF 9204

  • Page 1 STAIR HEATER USER MANUAL Subject to change without prior notice TUM6410 IMPORTANT Read this instruction carefully before installing the product R. Stahl Tranberg AS info@stahl-tranberg.com stahl-tranberg.com Main office: Strandsvingen 6 N-4032 Stavanger Norway +47 51 57 89 00 +47 51 57 89 50 Office Oslo: Luhrtoppen 2 N-1470 Lørenskog...
  • Page 2: Content In Box

    Any dam- age done to the equipment during the transportation is not the responsibility of Stahl Tranberg AS. If the content is not complete, file a claim to the producer immediately. Please read through the full description before starting the CONTENT IN BOX assembly.
  • Page 3: Installation

    TEF 9204 STAIR HEATER ENCLOSURE USER MANUAL INSTALLATION Step 1: Prepare the flexible conduits for the same lengths as the cable estimated between each step and install the conduit connectors. (The conduit should be cut to length in an un-compressed or un-stretched state to allow for flexibility both directions), see fig.
  • Page 4 TEF 9204 STAIR HEATER ENCLOSURE USER MANUAL INSTALLATION Step 3: Mark or measure on the cable 10cm from the aluminium profile and bend the cable to align it in the adjacent slot of the profile:, see fig. 4. Fig. 4 Step 4: Repeat the procedure (step 3) for all the aluminium profiles.
  • Page 5 TEF 9204 STAIR HEATER ENCLOSURE USER MANUAL INSTALLATION Step 6: Install the profile closest to the conduit exit slot first, see fig. 7. Fig. 7 Step 7: Install the conduit adaptor to the slot and align the aluminium profile to the centre of the base, see fig. 8.
  • Page 6 TEF 9204 STAIR HEATER ENCLOSURE USER MANUAL INSTALLATION Step 9: Secure the aluminium profiles with the Stainless spacers and M6 washer:, see fig. 10. (Note! The use of brass on aluminium shall never be combined in a harsh environment.) Fig. 10 Step 10: Install the lid, see fig.
  • Page 7 TEF 9204 STAIR HEATER ENCLOSURE USER MANUAL INSTALLATION Step 12: In the second (following) heater make sure you have some extra length between the end of the conduit adaptor and the top aluminium profile, see fig. 13. Fig. 13 Step 13: Repeat step 3-8 and align the profiles in the base, see fig.
  • Page 8: Technical Data

    80W, 200W, 230W (respectively to lengths) Heat cable: Self-regulating QTVR heating cable (purchased separately) Other: All self-regulating heater installations require a 30mA earth fault switch. PARTS INCLUDED IN THE TEF 9204 STAIR HEATER Part No. Part No. Part No. QTY. in 1 pc heater...

Table of Contents