1. SAFETY INSTRUCTIONS When using the machine, always observe the enclosed safety instructions as well as the additional safety instructions. The following symbols are used throughout this manual: Denotes risk of personal injury or damage to the tool. For Your Safety: Only aﬞer reading the operation manual and following all instructions, can you operate the tool safely.
3. OPERATION MOUNTING AND REMOVING A BIT OR CHISEL This tool uses drill bits and chisels with a special tool holder system for quick and easy mounting. • Apply a small amount of grease on the bit or chisel shaﬞ. •...
Page 7
USING THE SEPARATE CHUCK • With the separate chuck your machine is suitable for standard drill bits. • Select the drill without hammering function. • Insert the adaptor (11) in the drill chuck (4). • Fasten the separate chuck (12) on the screw-thread. Tighten securely but do not force. •...
the drill bit or chisel is correctly fiמּed. • The separate chuck causes small oil leaks through the housing seals. In this case, it is necessary to tighten the screws. SWITCHING ON AND OFF • To switch on the machine, press the on/off switch (1). CHECKING AND REPLACING THE CARBON BRUSHES •...
Page 10
N° NAME N° NAME Rubber Head Internal Retaining Ring 35 Steel Ring 17.5X2 Big Gear Steel Frame Spring 30*1.2 Spring 30.2*1.8*76 Square Key 21.5*5*5 Seal Look Hex. Socket Hd. BoltM5X22 Dome Pin 8X18.7 Spring Washer 5 Needle Bearing HK1210 Flat Washer 5 Steel Sleeve 26X22X9 Cylinder Case Two Function Buמּom...
Page 11
N° NAME T-shape Nut M8 Auxiliary Handle Seat Auxiliary Handle Hoop Leather Collar 11x2 Dial The Torsion Shaﬞ Washer 18 Flat Washe 4 Spring Washe 4 Dial The Torsion Spring Lock Cylinder...
WARRANTY Product model Date of sale Company Serial number Client's signature Username Please read and agree to the terms of the warranty. The manufacturer warrants the product against faulty materials and workmanship for a period of 1 year from the date of first purchase to the original purchaser. The warranty is applicable when the product is used in a “home owner”...
Need help?
Do you have a question about the eZ32EZ-150 and is the answer not in the manual?
Questions and answers