Sontronics ELEVATE Instructions

If you have any questions regarding any of the instructions, please email info@sontronics.com
Use with products heavier than the rated weights indicated may result in instability causing possible injury.
Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
Safety gear and proper tools must be used. This product should only be installed by professionals.
Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact your place of
purchase for a replacement.
Check that the product is secure and safe to use at regular intervals (at least every three months).
SONTRONICS
Multi-Joint Adjustment Studio
ELEVATE
Microphone Arm Stand
multi-position microphone mounting arm
INSTRUCTION & SAFETY BOOKLET
MDS06-1
Please read before assembly & installation
For more information & to see our full range of microphones, visit www.sontronics.com
INSTALLATION MANUAL
®
®
www.sontronics.com
1kg
(2.2lbs)
RATED