1. Manuals
  2. Brands
  3. EOS Manuals
  4. Media Converter
  5. EOS-80W-96W-24V-DMX
  6. Installation manual

EOS -80W-96W-24V-DMX Installation Manual

Dmx decoder and driver
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

IP20
SAFETY & WARNINGS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1. Install in accordance with national and local electrical code
regulations.
2. This product is intended to be installed and serviced by a
qualifie , licensed electrician.
3. Do not modify or disassemble this product beyond instructions
or the warranty will be void.
4. Do not use if there is any damage to the fixture or wiring.
Inspect periodically.
5. Do not submerge in liquids or use the product in the vicinity of
standing water or other liquids.
6. Do not install near areas with exposure to salt water or
chlorinated water.
7. Do not install in direct sunlight.
8. Do not attempt to fix this product in the fiel
9. Failure to follow safety warnings, and installation instructions
will void the warranty for this product.
120V /
277V
AC
DRY LOCATION
COLOR-CHANGING
DMX DECODER AND DRIVER
QUICK SPECS / MODELS
SKU
Input
Power Output
Ambient
Temp †
Environment
† Do not install product in environment outside
listed temperature.
*NOT FOR USE IN SUBMERSIBLE APPLICATIONS, OR
WITHIN 5 FEET OF A SWIMMING POOL.
Page 1
INS TALLATION GUIDE
EOS-80W-96W-24V-DMX
120VAC / 277VAC 50/60Hz
80W - 96W
-4° - 176°F (-20° - 80°C)
Indoor / IP20

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EOS-80W-96W-24V-DMX and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for EOS EOS-80W-96W-24V-DMX

  • Page 1 IP20 277V DRY LOCATION COLOR-CHANGING QUICK SPECS / MODELS SAFETY & WARNINGS READ AND FOLLOW ALL SAFETY INSTRUCTIONS EOS-80W-96W-24V-DMX Input 120VAC / 277VAC 50/60Hz 1. Install in accordance with national and local electrical code regulations. Power Output 80W - 96W 2.

  • Page 2: Required Tools

    DMX DECODER AND DRIVER INS TALLATION GUIDE REQUIRED TOOLS INSTALLATION TURN POWER OFF AT CIRCUIT BREAKER SHOCK HAZARD! May result in serious injury or death. Turn power OFF at circuit breaker prior to installation. 1. Phillips-head Screwdriver 2. Flat Head (Standard) Screwdriver 3.
  • Page 3 DMX DECODER AND DRIVER INS TALLATION GUIDE INSTALLATION (CONT.) FASTEN DECODER COVER CONNECT 120VAC / 277VAC LINE Use a phillips-head screwdriver to fasten cover. VOLTAGE WIRES TO INPUT OF DECODER Insert each wire into the corresponding terminal.* *Note: Terminals labeled “NC” have no connection and are not used.
  • Page 4 DMX DECODER AND DRIVER INS TALLATION GUIDE SYSTEM DIAGRAMS The following diagrams are provided as example system designs. For information regarding larger systems or systems not pictured below, please see our web page or contact technical support. Always review each component installation guide for detailed and up-to-date wiring instructions.

  • Page 5: Data Connection

    DMX DECODER AND DRIVER INS TALLATION GUIDE 1/R- 1/R- DATA CONNECTION 2/G- 2/G- DATA CONNECTION DETAILS 3/B- 3/B- (Brown & White/Brown) GROUND (White/Orange) DATA + (Orange) DATA - PINOUT CONNECTION GUIDE The following diagrams/tables indicate the appropriate connections for patching your own CAT5/RJ45, and XLR-3 splice cables. These diagrams are for general reference and may slightly differ between different cable manufacturers.

  • Page 6: Junction Box Installation

    DMX DECODER AND DRIVER INS TALLATION GUIDE JUNCTION BOX INSTALLATION TROUBLESHOOTING Fasten DMX Decoder and Driver to Lo-Pro Junction Box. • Ensure an appropriate gauge of wire Shift in is installed between strip light and brightness LED driver. See VOLTAGE DROP and/or kelvin CHARTS.

  • Page 7: Supplied Accessories

    SUPPLIED ACCESSORIES PUNCH OUT KNOCKOUTS FOR CONDUIT ACCESS A. Junction Box (1) F. Mounting Screws (4) B. Driver Mounting Bracket G. Wire Connector 22-14AWG (600V) (6) C. Ground Screw (1) H. NM (Non-Metallic) Cable D. Thumb Screws (2) Strain Relief (2) - 3/8” E.
  • Page 8 INSTALLATION CONT. WIRE DRIVER TO AC INPUT AND LOW VOLTAGE LOAD. WARNING! SYSTEM DIAGRAM NOTE! Each compatible LED driver has a unique System Diagram and color-coded wires. Please see each LED driver, luminaire (tape light, puck light, etc.), and control installation guide for System Diagrams, connections and wire colors. Pictured below is a Traditional ON/OFF Switching system.
  • Page 9 INSTALLATION CONT. FINISH ASSEMBLY. TURN POWER ON AT CIRCUIT BREAKER. a. Tighten Strain b. Tuck Wires into Relief. compartments. E (2) b. Fasten lid to Lo-Pro Junction Box. Page 9...

Table of Contents