1. Manuals
  2. Brands
  3. Faunamaster Manuals
  4. Farm Equipment
  5. DH140
  6. User manual

Faunamaster DH140 User Manual

Harrow
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
H A R R O W
Usermanual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DH140 and is the answer not in the manual?

Questions and answers

Summary of Contents for Faunamaster DH140

  • Page 1 H A R R O W Usermanual...
  • Page 2 Thank you for purchasing a Faunamaster Harrow DH140 This disc harrow is designed by Faunamaster and is used for small tractors or ATV/UTV. This manual provides the main technical info, safety rules, structure of main components, installation, adjustment, operation and daily maintenance of the Faunamaster harrow, as well as common faults and troubleshooting methods.

  • Page 3: Table Of Contents

    Overview ..............4 Intended use .

  • Page 4: Overview

    1. Overview The Faunamaster disc harrow is a harrow specially designed for ATV/UTV and small tractors. In this manual, safety warning symbols indicate important safety information. When seeing this symbol, the user should be alert of potential harm, carefully read the information below the symbol, and inform other operators.

  • Page 5: Intended Use

    2. Intended use The Faunamaster harrow is only used for conventional agricultural operations with tractors or ATV/UTV, and can be used for crushed soil and flat land after cultivation. It can also be used for soil stirring, weeding, fertilizer mixing, and seed covering.

  • Page 6: Safety Technical Regulations

    3. Safety technical rules 3.1 Safety precautions Before use, carefully read the user manual and familiarize yourself with the structure, installation, performance, usage adjustment, maintenance, and common troubleshooting methods of this machine. During machine operation, it is strictly prohibited to stand on the machine. It is strictly prohibited to turn before the machine is lifted.

  • Page 7: Main Technical Parameters

    4. Main technical specifications Model&Name Faunamaster Harrow DH140 Structure 3 Point Hitch / ATV / UTV Overall dimensions (LxWxH) 3570×1660×1200 Tractor (ATV/UTV) Power 20kW or 27 HP Working Width 1400 Speed km/h 12-15 Wheel Diameter Weight Wheel Type Pneumatic Rubber Wheel...

  • Page 8: Structure Of Disc Harrow

    5. The structure of a disc harrow The disc harrow mainly includes: 1BQX1.4-01 frame welding combination; 2. 1BQX1.4-02 ground wheel assembly; 3. 1BQX1.4-03 soil covered spring tooth welding combination; 4. 1BQX1.4-04 (07) Front and rear Disc Assembly; 5. 1BQX1.4-05 Traction frame welding combination; 6. 1BQX1.4-06 Spring Rod welding combination; 7.

  • Page 9: Ground Wheel Assembly

    5.2 Ground wheel assembly: mainly including: 1. 1BQX1.4-02-522 × 11-10 Wheel and rim combinations; 2. Small round nut M20 × 1.5; 3. Tapered roller bearing 30204; 4. 1BQX1.4-02-3X tire hub welding combination; 5. Tapered roller bearing 30205; 6. Lip shaped sealing ring FB30 ×52 × 8; 7. Seat bearing UCP208; 8. 1BQX1.4-02-4 Welding of shaft reinforcement sleeve;...

  • Page 10: Front/Rear Disc Assembly

    5.4. The combination of front and rear harrow assembly mainly includes: 1. 1BQX1.4-04-202 End stop A; 2. 1BQX1.4-04-2046210 bearing seat; 3. sealing ring FB60 × 80 × 84; 4. Deep Groove Ball Bearing 6210; 5. 1BQX1.4-04-206 Bearing Block Cover; 6. 1BQX1.4-04-401 Notched Disc; 7. Spacer; 8.

  • Page 11: Spring Rod Welding Combination

    5.6 Guide rod welding combination mainly includes: 1. Rod welding combination; 2. Spring A; 3. Spring B; 4. Spring pin; 5. Pin shaft B14x75 5.7 Weeding tynewelding combination 5.8 Loosening tynewelding combination This piece is welded by 1.Tyne Seat 2. U-bolt Composed of locking pins and other components.

  • Page 12: Suspension Pull Rod Welding Combination

    5.10 Suspension Tie Rod Assembly,the traction rod combination connects the suspension frame and the traction frame, and can adjust the height position of the traction point appropriately. Both of these components are composed of: 1. Left screw welding; 2. Pull rod welding; 3. Right screw welding; 4. Spring pin; 5. Pin shaft B14 * 70. The welding length of the traction pull rod combination and suspension Tie Rod Assembly are different.

  • Page 13: Assemble

    6. Installation of disc harrow Before installing the disc harrow, first check the type and quantity of components according to the packaging list. Separate the parts into clean areas, remove dirt from the bearings and friction parts, and apply lubricating oil. Referring to the aforementioned “Part Manual of Disc harrow”, the installation sequence is as follows: Support the Frame welding combination and leave the underground clearance not less than 750mm.

  • Page 14: Adjusting

    7. Adjustment of disc harrow 7.1 Adjustment of front and rear gang angle The disc harrow needs to be at a certain deflection angle to complete the soil cutting and turning operation. The adjustment range of the gang angle of the disc harrow is generally 14 ° -23 °, which is determined according to the requirements of land preparation.

  • Page 15: Operating Instructions

    8. Operating instructions 8.1 Inspection before operation 1. Check and tighten all fasteners. 2. Fill all parts that need to be lubricated with lubricating oil. 3. Check the operation of the actuator and whether the ground wheel lifting is normal. 8.2 Precautions for use 1.

  • Page 16: Maintenance And Storage

    9. Maintenance and storage 9.1 Daily technical maintenance 1. After the completion of each use, the soil on each part of the equipment should be cleaned in a timely manner. 2. After each use of work, check and tighten the fasteners in all parts. 3.

  • Page 17: Common Faults And Troubleshooting Methods

    10. Common faults and troubleshooting methods Faults Fault cause Troubleshooting Offset to one side during operation Unbalanced force Adjusting the angle of the axel Inconsistent depth of front and rear The front and rear of the disc harrow Adjust the length of the traction rod axel are not level to keep the frame level...

  • Page 18: List Of Vulnerable Parts

    11. List of Vulnerable Parts Drawing Number Name GB/T 297 Bearing 30204 GB/T 297 Bearing 30205 1BQX1.4-03-601 Rake Spring Rod Left 1BQX1.4-03-602 Rake Spring Rod Right 2BFX16-02-601 U Bolt M16 1BQX1.4-04-401 Notched Disc 1BQX1.4-04-402 Front Scraper 1BQX1.4-07-401 Rear Scraper 1BQX1.4-04-204 6210 Bearing houes GB/T 276 Bearing 6210...

  • Page 19: Appendix

    12. Appendix 12.1 Under-warranty Regulations 1. The warranty period for this product is 24 months, calculated from the date of purchase (invoice filling date). 2. During the warranty period, if the equipment is damaged or the performance deteriorates due to product quality, and it is confirmed that the manufacturer is responsible, a warranty will be given.
  • Page 20 H A R R O W Faunamaster ApS · Tårnvej 32 · VAT No. DK42053767 Phone +45 61404080 · Web: www.faunamaster.com · Mail: sales@faunamaster.com...

Table of Contents