EverSirius EF100 Bi-Color User Manual

Fan-less led fresnel

Advertisement

Fan-less LED Fresnel
EF100 Bi-Color
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EF100 Bi-Color and is the answer not in the manual?

Questions and answers

Summary of Contents for EverSirius EF100 Bi-Color

  • Page 1 Fan-less LED Fresnel EF100 Bi-Color User Manual...
  • Page 2: Safety Instructions

    SAFETY INSTRUCTIONS CAUTION Be careful with your operations.With a dangerous voltage you can suffer a dangerous electric shock when touching wires! This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual.
  • Page 3 Please install and operate the fixture with following instructions. Meanwhile, please keep this manual well for future needs. EverSirius LED Fresnel EF100 Bi-Color is made of a new type of high temperature strength of Aluminum Alloy with nice outlook. The fixture is designed and manufactured strictly following CE standards, complying with international standard DMX512 protocol.
  • Page 4: Features And Specifications

    FEATURES & SPECIFICATIONS ● 1*200W 2-IN-1 COB LED (CW+WW) ● 50,000 hours life span and low power consumption ● Color Rendering Index(CRI): Ra≥90 ● High efficiency fresnel lens ● Soft and even field of light ● Manual zoom system from 15° -50° ●...
  • Page 5: Dmx-512 Control Connections

    DMX-512 CONTROL CONNECTIONS Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR input of the moving head. You can chain multiple Moving head together through serial linking. The cable needed should be two core, screened cable with XLR input and output connectors.
  • Page 6 1:Ground COMMON 2:Data(-) 3:Data(+) DMX+ DMX- DMX Output DMX Input DMX 512 OUT DMX 512 IN 3-Pin XLR Socket 3-Pin XLR Socket 3-PIN XRL 3-PIN XRL 120Ω For installations where the DMX cable has to run a long distance or is in an electrically noisy environment, such as in a discotheque, it is recommended to use a DMX terminator.
  • Page 7: Product Feature

    Product Feature ➢ 2 kinds of running model ◼ External control mode (Slave model) ◆ DMX 512 controller control ◆ Master/salve model control (auto match the signal from controller and the Master light, no need to set by menu) ◼ static mode (Master model) ◆...
  • Page 8: Menu Operations

    MENU OPERATIONS MENU:Switch to Main menu(Refer to the details as below chart). UP/DOWN:Change the value of current menu(Refer to below chart). ENTER:Save data. If have submenu,then it will be the same time of changing submenu and save data. Menu Submenu Display State DMX Mode...
  • Page 9: Channel Data

    Channel data Channel Data Function Remark 0~255 Dimmer 0~255 Color temperature 0~10 No strobe 11~255 Speed of strobe (255 is the fastest) OPERATION INSTRUCTIONS ·The Fanless MINI FRESNEL 100WW&CW is an LED stage light for on-site decoration purpose. · Don't turn on the fixture if it's been through severe temperature difference like after transportation because it might damage the light due to the environment changes.
  • Page 10: Installations

    INSTALLATIONS For added protection mount the fixtures in areas outside walking paths, seating areas, or in areas were the fixture might be reached by unauthorized personnel. Before mounting the fixture to any surface, make sure that the installation area can hold a minimum point load of 10 times the device's weight.
  • Page 11: Cleaning And Maintenance

    Photographic Chart Spectrogram Cleaning and maintenance Now ignoring maintenance and cleaning is very good way of creating problems "down the road" and many companies and installations do just that. However the net result is, no matter what the fixture, premature failure! Changing the oil in a car, most people do on a regular basis.
  • Page 12 The shutter blades sometimes require cleaning as well. With the led fresnel spotlight turned off, use only a moist lint-free cloth. Never use alcohol or solvents to clean the fixture. Never spray anything onto the fixture at the front or in any place on the fixture. www.eversirius.com...

Table of Contents