GE ASH06LL - 6000 BTU Air Conditioner Owner's Manual & Installation Instructions page 12

Installation Instructions
[] PREPARE AIR CONDITIONER
(CONT.)
[] Insert the frames of the accordion panels
into the top and bottom mounting rails.
Attach the accordion panels to the side
of the case using 6 type A screws,
Top mounting
Accordion panels
[] INSTALL AIR CONDITIONER IN
WINDOW
[] Cut the window sash seal to the window
width and stick the adhesive side to the
bottom of the sash.
--Window
sash seal
[] Place the air conditioner on the sill
with the bottom mounting rail against
its back edge. Center it and close the
window securely behind the top mounting
rail. It should be level or slightly tilted
to the outside. Use a level; about a 1/3
bubble will be the correct case slant to
the outside.
12
[] INSTALL AIR CONDITIONER IN
WINDOW (CONT.)
[] Extend the left and right accordion
panels to the vertical window sashes and
attach with 4 type B screws.
Type B
screws
Type B
screws
[] Attach the brackets to the sill on both
sides using two type B screws.
[] Tighten the screws to secure the brackets
in place on each side of the air conditioner.
[] INSTALL SECURITY BRACKET
AND FOAM TOP WINDOW
GASKET
[] Attach a security bracket with a type B
screw.
[] Cut the foam top window gasket to the
window width.
[] Stuff the foam between the glass and the
window to prevent air and insects from
getting into the room.
/
Caulk or weather-strip any gaps or
openings to the outside to seal the
installation.
The installation is now complete,