Advertisement
Quick Links
Advertisement
Related Manuals for uandksound M4500D
Summary of Contents for uandksound M4500D
- Page 1 M4500D Class D Power Amplifier Owner’s Manual...
- Page 2 UandKSound was founded in 2015 with a clear goal: to deliver high quality products with the best value for money. Today, all UandKSound products are designed in Europe and carefully crafted to deliver a level of performance that stands above expectations.
-
Page 3: Safety Instructions
Please refer to local regulations for proper handling of such products. • Construction of state-of-the-art equipment should be connected to a power outlet with good grounding. • When the power plug or device connector is used as a disconnect device, always keep the disconnect device (power outlet) accessible. WWW.UANDKSOUND.COM... - Page 4 14. Ask a professional service person for repairs. Any form of equipment damage needs to be repaired. Such damage may include but is not limited to the power cord or plug, liquid ingress, or debris into the equipment, exposure to moisture or rain, improper operation or equipment falling. WWW.UANDKSOUND.COM...
- Page 5 Replacement with unauthorised parts may result in fire, electric shock, or other hazards. WWW.UANDKSOUND.COM...
- Page 6 M4500D, and even daisy-chain several M4500D power amplifiers for complex installations. M4500D is not a typical Class D power amplifier. The units have very low distortion and an excellent signal to noise ratio, making them the perfect amplifier on the market.
-
Page 7: Specifications
（20Hz-20KHz) ＞80 dB between ANY Channel Crosstalk Phase （20Hz-20KHz) Less than 15 degree Power-Requirements ~100V-240 VAC, 50Hz-60Hz, 2300W (All Channel Driven) Dimensions 482 mm W 108 mm H (including feet) 400 mm D (including speaker connections) Chassis Type Weight 11KG WWW.UANDKSOUND.COM... -
Page 8: Usage, Controls And Connections
USAGE, CONTROLS AND CONNECTIONS M4500D FRONT PANEL FEATURES 1. Power Switch When the Power Switch is “-”, the idle mode is activated, the LED is illuminated, and this mode can be disabled by turning the switch to the “O” position. - Page 9 ON-Always On. • b. In the TRIGGER (Left) position, the M4500D’s ON and OFF functions are contro- lled by a trigger in from a source or preamplifier device (Use the 1/8” mono jack to connect). The trigger accepts 12VAC/DC and will turn the M4500D on whenever a trigger is present.
- Page 10 T15AL 250V. Use the correct IEC line cord, plug the line cord into an AC wall socket which is correctly configured with the voltage and current supply speci- fied for the M4500D. Do not plug this line cord into a power trip, it must plug directly into a wall socket with grounding.
- Page 11 (5) years and active electronics, three (3) years. This warranty is limited to manufacturer defects, either in materials or workmanship. UandKSound is not responsible for any consequential or inconsequential damage to any other unit or component or the cost for installation or extraction of any component of the audio system.
- Page 12 Thanks for purchasing our products. Please contact your nearest official distributor to know more details about the warranty conditions and installation best practices. You can also contact us by visiting:...
Need help?
Do you have a question about the M4500D and is the answer not in the manual?
Questions and answers