1. Manuals
  2. Brands
  3. HumminGuru Manuals
  4. Cleaning Equipment
  5. S-DUO Pro HG010
  6. Owner's manual

HumminGuru S-DUO Pro HG010 Owner's Manual

2-in-1 ultrasonic record stylus cleaner & digital pressure gauge
Hide thumbs

Advertisement

Table of Contents

2-in-1 Ultrasonic Record Stylus Cleaner
& Digital Pressure Gauge
Owner's Manual
Model: HG010
Scan to check the cartridge compatibility
and stylus rubber support suggestion
Thank you for buying the HumminGuru S-DUO Pro. To apply this product safely and properly, please read the
manual thoroughly and well understand before use. After reading, please keep the manual handy.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S-DUO Pro HG010 and is the answer not in the manual?

Questions and answers

Summary of Contents for HumminGuru S-DUO Pro HG010

  • Page 1 Scan to check the cartridge compatibility and stylus rubber support suggestion Thank you for buying the HumminGuru S-DUO Pro. To apply this product safely and properly, please read the manual thoroughly and well understand before use. After reading, please keep the manual handy.

  • Page 2: Safety Precautions

    Important! Read all instructions carefully before use and keep it for future reference. The HumminGuru S-DUO Pro executes two main functions: ultrasonic cleaning and vertical down force measurement. The device referred to safety precautions to prevent property damage and danger to the users and others.
  • Page 3 WARNING: The Device This device can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the equipment a safe way and understand the hazards involved. Children shall not play with the device.
  • Page 4 Overview Bi-Directional LCD Display Scale Platform Water Basin 5g Mass Weight Storage Ultrasonic Cleaning Mode Pressure Gauge Touch Control Mode/ Tare Touch Control Charging Terminal Power Switch 5g Mass 0.5ml Weight Water Dropper Rubber Supports Drying Pads Charging Base Storage USB-C Area Charging Port...

  • Page 5: Controls And Functions

    Controls and Functions Power Switch The power switch is positioned at the bottom of the device. Slide the switch to the right to power on the device. Once turned on, promptly place the device on a level surface. To power off the device, slide the switch to the left.
  • Page 6 Water Basin Must insert the rubber support properly onto the water basin, and then use the water dropper to fill up the basin with water before starting the ultrasonic cleaning mode. • DO NOT operate the cleaning mode without water in the water basin. The Drying Pad Drying Stylus Tip Drying Stylus Housing...
  • Page 7 • Pick up the device by holding the lid may result in dropping. • Pick up the device from the bottom of the device. On/Off Touch Control Charging the Device To charge the HumminGuru S-DUO Pro, begin by plugging one end of the USB-C cable into the charging port on the charging base and the other end into a power outlet.

  • Page 8: Setting Up The Device

    Setting up the Device Open the lid. To power on the device, slide the switch to the right. The power switch is positioned at the bottom of the device. Place the device on the turntable platter. Choose the desired function mode and follow the instructions on the following pages before initiating the mode.
  • Page 9 Rest the cartridge on top of the rubber support and ensure the stylus tip is submerged in the water. Stylus Rubber Support Notice: The stylus cantilever should not be leaning against the stylus rubber support. Use the drying pad for water absorption, lift up Touch the ultrasonic cleaning mode ( ) and reposition the tonearm on the turntable.

  • Page 10: Errors And Trouble Shooting

    Errors and Trouble Shooting Condition Solution Overload warning. Indicating that the scale is overloaded with a capacity ≥10g. Do not place objects on the scale that exceed this limit. Overload Error warning: Overload or setup error. 1.Ensure that the device is placed on a stable and level surface after powering on.

  • Page 11: Specification

    HumminGuru warrants this product against defects in material or workmanship for the original purchaser/user for one year from the original date of receipt of product. Pursuant to this Limited Warranty, HumminGuru will, at its option, (i) repair the product using new or refurbished parts, or (ii) replace the product with a new or re- certified/ refurbished product.
  • Page 12 For service, or questions, please contact customer support at support@happywell.com.hk Happy Well International Enterprise, Ltd. Find out more at Rm. 1202. 12/F New Mandarin Plaza, Tower B, www.humminguru.com No. 14 Science Museum Road, Tsim Sha Tsui East, Kowloon, Hong Kong (852) 2544 2728 Printed in China ©...

Table of Contents