Advertisement
Quick Links
Goodman Handle
800-0418-A
Mounting Plate
Goodman Handle Frame
Thumb Screws
Thumb Rest
Ball Mount Thumb Screw (Sold Separately)
Part # 800-0438-A
Step 1. Mounting Plate Placement:
a.
Position the mounting plate between the
Goodman Handle frame with the recess
slot for bolt heads facing downwards.
b.
For left hand: position the thumb rest on
the right side and insert the mounting
plate with the extended slot facing back
- toward your arm.
Step 2. Thumb Screw Installation:
a.
Secure the plate position by tightening
both thumb screws.
Step 3. Bungee Cord Attachment:
a.
Feed the open end of the bungee cord
through the hole in the bottom of the
thumb rest and tie an overhand knot,
pulling the knot into the hole.
b.
Once the fit is confirmed, cut the tail of
the cord with scissors. Make sure to hold
the end under a flame to seal it from
unraveling.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Light motion 800-0418-A
Summary of Contents for Light motion 800-0418-A
- Page 1 Goodman Handle Step 1. Mounting Plate Placement: Position the mounting plate between the 800-0418-A Goodman Handle frame with the recess slot for bolt heads facing downwards. For left hand: position the thumb rest on Mounting Plate the right side and insert the mounting plate with the extended slot facing back - toward your arm.
- Page 2 Step 4. Sola 2L Mounting: Remove mounting accessories from your Sola. Attach the ¼-20 mount adapter to the Goodman handle plate using the 1/4-20 Mount Adapter ¼-20 bolt. Make sure the tab with the hole is facing forward. Slide your Sola light onto the mount adapter from the back to the front until the adapter tab hole lines up with the threaded insert on the Sola...
Need help?
Do you have a question about the 800-0418-A and is the answer not in the manual?
Questions and answers