1. Manuals
  2. Brands
  3. Taramps Manuals
  4. Recording Equipment
  5. TEQ 7.4
  6. Instruction manual

Taramps TEQ 7.4 Instruction Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

The installation of this product must be made by a qualified professional.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TEQ 7.4 and is the answer not in the manual?

Questions and answers

Summary of Contents for Taramps TEQ 7.4

  • Page 1 The installation of this product must be made by a qualified professional.

  • Page 2: Term Of Warranty

    12 months from the date of purchase. In case of defect during the warranty period, TARAMPS responsibility is limited to the repairing or replacement of the device of its own making.

  • Page 3: Safety Requirements

    Failure to heed the instructions will result in risk of injury to user or product damage. Taramps reserves the right to modify the contents of this document at any time without prior notice and does not have the obligation to apply the changes in units which were previously produced.

  • Page 4: Important Recommendations

    • Frequency response from 6 Hz to 55 KHz -1 dB, signal-to-noise ratio >100 dB. Important recommendations TEQ 7.4 must be fixed in an easily accessible and ventilated location. It is not recommended to install the product on the sides of speakers, as excessive vibrations can damage their internal components.
  • Page 5 Top commands 1- Power Connector: The recommended wiring gauge is 0.75mm². GND - Power Negative (Connect to the negative pole of the battery). REM - Remote input (Connect the remote output of the head unit). 12VDC - Positive Power Supply (Connect to the positive pole of the 12V battery). 2- Channel L: Left output for the SUB 3- Channel R: Right output for the SUB 4- Channel L: Front left output...

  • Page 6: Installation

    Installation Connection example 1 TEQ 7.4 Remote cable 0,75mm² Head unit *Illustrative images Amplifier 1 for Subwoofers Amplifier 2 for Front and Rear...

  • Page 7: Technical Features

    Technical features Input & Outputs Number of input channels (Aux / Main):................2 stereo Number of output channels (Front / Rear / Subwoofer):..........3 stereo Main gain adjustment:......................-13 ~ +8 dB Aux gain adjustment:......................-13 ~ +8 dB Input impedance:........................10K Ohms Output impedance:.........................100 Ohms Maximum input level:..................28.28Vpp (10 V RMS)* Maximum output level:..................28.28Vpp (10 V RMS)* Frequency response (-1dB):..................6 Hz ~ 55 KHz...
  • Page 8 Manufactured by: TARAMPS ELECTRONICS LTDA TAX ID: 11.273.485/0001-03 Highway: Julio Budisk, SN, KM 30 Alfredo Marcondes - SP Made in Brazil...

Table of Contents