DAMUZHI DMZ-1882WMK Instruction Manual

Instruction manual
DMZ-1882WMK
1、 Configure the main card.
After the installation of the battery short "drop" sound while the green
light is on to indicate the power. The first card touched is the first main card,
after touching the card, a "drip drip drip" 4 sound beeps and the green light
blinks, indicating successful entry and can continue to configure the main card
(a maximum of 15 configuration) within 5 seconds no new card added to close
the configuration function.
(Please make sure that you have configured all the cards to be used, after that
you need to restore the factory settings and re-configure them)
2、 Setting of user password and management password.
Note: User password and management password are independent, please
make sure to modify user password and management password separately
before use. The user password and management password are modified in the
same way.
Factory password: User password is "1" and management password is "6",
which is composed of 1-15 digits. It can be saved for a long time in case of
power failure. First time user password setting: Press 1 key (Note: 1 is the
factory user password) a - Press C key one by one to enter a new password
(example: 123456) - mouth butterfly, hear a long tone (tick ~) after the new
password (123456) to take effect.
First time management password setting: press 6 key (Note:6 is the factory
management password) a - press C key a - enter the new password
(Example:654321) - mouth # key, after hearing a long tone (beep ~) the new
40.5
password (654321) takes effect.
Modify the password method:Enter the old password set before a - Press C
key a - Enter the new password a - Press OK key a new password takes effect.
3、 Unlock: Swipe the card to enter the password
Swipe the main card to open the lock: use the main card near the card
induction area, if the verification is successful, the green indicator will light up,
and there is a musical indication, then you can turn the knob clockwise to open
the lock.
Enter the password to open the lock: Enter the password set on the
keyboard, each key has a sound and light prompt to indicate that the input is
valid, press the # key when finished. If the password is correct, the green light
will light up, and there is a musical prompt, you can turn the knob clockwise to
open the lock.
If you do not turn the knob during the opening period, the combination
lock will be automatically reset and locked. If the card/password is not correct,
there will be a double tone (beep) to indicate the error, please swipe the card
again or enter the correct password.
4、 Unlocking and locking.
Unlock: After successful verification, wait for the music to sound
turn the knob clockwise to the lock open position to unlock.
Locking: After the use is complete, turn the knob counterclockwise
to the locking position to lock
5、 Automatic alarm.
If the card is swiped four times in a row or the password entered is wrong,
an alarm will occur for the password lock and the alarm will last for 60 seconds,
during which the alarm can be lifted by using the adapted master card or
entering the correct password and pressing the # key. This function can prevent
others from deciphering the password.
6、 Insufficient power prompt.
When the power is low, there will be three "beep beep beep" when
.