The technical experts and engineers of b-plus technologies GmbH (b-plus) will be glad to offer technical support. b-plus has set itself the objective to develop products that are easy to use and to support you if you want to integrate the b-plus products in your system. ...
NETLion 10G General information 1.4 Intended use and target groups This product is intended for the use in vehicle test carrier environment. NETLion 10G is intended as a development tool for 2.5/5/10GBASE-T1 networks. Take appropriate actions and measures to determine the suitability of the products for the intended purpose beyond the use for which the products have been released (e.g.,...
Use the corrects cables and the correct connectors which are in the shipping unit or approved by b-plus. Only operate the NETLion 10G with an external 9 – 32 V DC power supply or battery . The maximum electrical current is 1 A (9 V).
Do not remove identification numbers, repair work by yourself, or modify the product. Only open and service the product if you have been instructed to do so by b-plus personnel. Contact b-plus or an authorized service provider of b-plus who is permitted to repair the product.
Precision Time Protocol (gPTP)) on the end devices or switches. 8.2.2 Network TAP Mode NETLion 10G is also known as a Layer 1 TAP which means that incoming data is transmitted immediately upon receipt. Therefore, it is possible to use time synchronization protocols based on PTP together with NETLion 10G without problems This is not possible with Layer 2 TAPs which refer to the store-and-forward principle.
Need help?
Do you have a question about the NETLion 10G and is the answer not in the manual?
Questions and answers