Do you have a question about the FRD1000R and is the answer not in the manual?
Questions and answers
Summary of Contents for Fukuda FRD1000R
Page 1
If you need any more help/advice or the instrument requires a calibration check, then please contact our Service Dept on 08000 869 769. We would be pleased to help. Compatibility: The FRD1000R is a perfect match for the following current model of Fukuda rotary laser level: FRE-203XR (2nd generation only) ..cont...
Power source: The FRD1000R detector is powered by 4pc x type AA alkaline batteries. Open the rear compartment and fit four heavy duty batteries, observing correct polarity. Remove batteries for safe storage, if the detector is unused for more than a three-month period.
Page 3
Radio Pairing: Important note – the FRD1000R must be radio linked (paired) with the laser level to enable you to use either of the auto-alignment procedures. An FRE-203XR (2 generation) purchased with an FRD1000R will be pre- paired, prior to dispatch.
Page 4
& right to find it, then locks on. This system is only available when using a Fukuda FRD1000R radio paired detector to an FRE-203XR (2 generation) laser level, over a range of up to 100m.
Page 5
General Safety Advice: This is an accurate measuring device, so to give good service, look after it Prevent the FRD1000R from receiving severe knocks, bangs or vibration. Store the detector & its accessories in the supplied carry case. If wet, DRY before storing & keep in storage temperatures of 10 to 30*C.
Page 6
To contact us: Laser Levels Online, Unit 35, Bridge Business Centre, Beresford Way, CHESTERFIELD, S41 9FG. England Freephone: 08000 869 769 sales@laser-level.co.uk www.laser-level.co.uk “Laser Levels Online” is an internet trading division of P. R Engineering Ltd...
Need help?
Do you have a question about the FRD1000R and is the answer not in the manual?
Questions and answers