Advertisement
Available languages
Available languages
Quick Links
WARNING
Always wear safety glasses and hearing protection. Follow all safety precautions and use best practices.
Read and understand the manuals that come with your power tools, ensure they are properly set up and in
good repair. Microjig assumes no liability for products not sold by Microjig.
▪ As always, your Grr-ripper should be firmly against
▪ If you need to remove either outer leg of your
the table saw rip fence in use.
Grr-ripper for any reason, you can simply cut through
the measurement scale along the seam where the leg
▪ The SafeRip Kit is only for use with the blade set
meets the main body of your Grr-ripper so the scale
vertically at 0 degrees on the bevel scale. Be sure to
will remain intact when you reinstall the leg.
visually check the center leg position when making
bevel cuts of any angle.
▪ Only use the SafeRip Kit with standard full kerf or thin
kerf sawblades. It is NOT designed to work with Dado
▪ The SafeRip Kit is designed to help you protect only
blades, molding heads or specialty blades of any
the adjustable center leg of your Grr-ripper. You still
type. When using these specialty cutters, always
need to ensure that the fixed 1/4" and 1/2" legs are
visually check the center leg for clearance.
not in the blade path when cutting.
READ BEFORE ASSEMBLY
Watch the
Prevent cutting Grr-ripper center leg at
Quick Start
the table saw.
Video
Set your center leg by the width of your
microjig.com/saferipstart
rip cut.
Warranty Registration
No leaning over to check the cut
Register your product for an
settings, and quicker set ups with no
extended 3-year warranty at:
check passes.
microjig.com/warranty
Stay Connected
Oversized Cursor protects the center
Be the first to learn about new
leg even to the left of the blade.
products, plans, and deals at:
microjig.com/newsletter
Metric and fractional scales so you can
work your way.
WARNING: This product can expose you to
chemicals including Nickel, which is known to
Reversable: works only with the 1/4" or
the State of California to cause cancer. For
more info visit: www.P65Warnings.ca.gov
1/2" leg against the rip fence.
Designed in the USA. Microjig, Grr-ripper,
"Work Safer. Work Smarter." are registered
trademarks of Microjig, Inc. ©2024
READ BEFORE ASSEMBLY
SafeRip Kit
GRSR-P50, GRSR-P50K2
Protect Your Grr-ripper
by the Numbers
v8.1
EN
Advertisement
Related Manuals for microjig GPR-Ripper SafeRip Kit
Summary of Contents for microjig GPR-Ripper SafeRip Kit
- Page 1 Always wear safety glasses and hearing protection. Follow all safety precautions and use best practices. microjig.com/warranty Read and understand the manuals that come with your power tools, ensure they are properly set up and in good repair. Microjig assumes no liability for products not sold by Microjig. Stay Connected Oversized Cursor protects the center Be the first to learn about new...
- Page 2 Manuel en Français over each cursor and screw the green GRSR-P50 Deutsches Handbuch knobs onto the dovetail bolts on each microjig.com/user-manuals end (Fig. 2). Fig. 2 Installing cursor on Grr-ripper Fig. 3a Dovetail T-Bolt Fig. 3b Thumb screw & nut...
- Page 3 Lea y comprenda los manuales que vienen con sus herramientas eléctricas, asegúrese de que estén configuradas Manténgase Conectado correctamente y en buen estado. Microjig no asume ninguna responsabilidad por productos no vendidos por Microjig. El cursor protege la pata central Sea el primero en conocer nuevos incluso a la izquierda de la hoja.
- Page 4 GRSR-P50 Deutsches Handbuch los botones verdes en los pernos en cola microjig.com/user-manuals de milano en cada extremo. (Fig. 2). Fig. 2 Instalación del cursor en Grr-ripper Fig. 3a Dovetail T-Bolt Fig. 3b Tornillo y tuerca...
- Page 5 Verfahren. Lesen und verstehen Sie die Handbücher, die mit Ihren Elektrowerkzeugen geliefert werden, und stellen Der übergroße Cursor schützt das Mittel- Sie sicher, dass sie ordnungsgemäß eingerichtet und in gutem Zustand sind. Microjig übernimmt keine Haftung für Bleiben Sie Verbunden Produkte, die nicht von Microjig verkauft werden.
- Page 6 Mittelteil sitzt (Abb. 2). Unterlegscheibe über jeden Schieber legen GRSR-P50 Deutsches Handbuch und die grünen Knöpfe auf die Dovetailbolzen microjig.com/user-manuals an beiden Enden schrauben. (Abb. 2). Fig. 2 Installation des Cursors auf dem Grr-ripper Fig. 3a Dovetail T-Bolt Fig. 3b Schraube & Mutter...
- Page 7 électriques, assurez-vous qu'ils sont correctement Le curseur surdimensionné protège la configurés et en bon état. Microjig décline toute responsabilité pour les produits non vendus par Microjig. Restez connecté Soyez le premier à découvrir de jambe centrale même à...
- Page 8 à chaque extrémité (Fig. 2). Fig. 2 Installation du curseur sur le Grr-ripper Fig. 3a Dovetail T-Bolt Fig. 3b Avec vis et écrou Fig. 4a Échelle du guide de coupe microjig.com/user-manuals...
Need help?
Do you have a question about the GPR-Ripper SafeRip Kit and is the answer not in the manual?
Questions and answers