Sealey MS0815 Manual page 2

Transformer
connection
Second stage sub
assembly fitted. Two
cones which are for
drying gloves or boots
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
Dryer stand
assembly for use
to dry helmet
Second stage sub
assembly showing
correct positioning of
the tubes
sales@sealey.co.uk
Original Language Version
First stage sub
assembly.
REGISTER YOUR
PURCHASE HERE
www.sealey.co.uk
MS0815 Issue: 3 15/11/23