Advertisement
Quick Links
Advertisement
Related Manuals for BERG USCB-36
Summary of Contents for BERG USCB-36
- Page 1 USER MANUAL Commercial Refrigerated Chef Bases Model: USCB-36 USCB-52 USCB-72...
- Page 2 WARNING DANGER – RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED. TO BE REPAIRED ONLY BY TRAINED SERVICE PERSONNEL. DO NOT PUNCTURE REFRIGERANT TUBING. CAUTION – RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED. CONSULT MANUAL/OWNER’S GUIDE BEFORE ATTEMPTING TO SERVICE THIS PRODUCT.
- Page 3 TABLE OF CONTENTS SAFETY INFORMATION INSTALLATION/OPERATION INSTRUCTIONS MAINTENANCE, CARE & CLEANING TROUBLE SHOOTING...
- Page 4 NOTICE: Loss or spoilage of products in your refrigerator/freezer is not covered by warranty. In addition to following recommended installation procedures you must run the refrigerator/freezer 24 hours prior to usage. SAFETY INFORMATION WARNING: Use this appliance for its intended purpose as described in this Owner Manual.
- Page 5 ■ Make sure that the unit is not resting on or against the electrical cord and plug. ■ To minimize personal injury, do not hang on the drawers. ■ Do not store any flammable and explosive gas or liquids inside the unit. ■...
- Page 6 INSTALLATION/OPERATION IMPORTANT!!! PLEASE READ BEFORE INSTALLATION ■ If the unit has recently been transported, please let unit stand still for a minimum of 24 hours before plugging it in. ■ Make sure that the unit drops down to desired temperature before loading the unit with product.
- Page 7 ■ Select a location away from heat and moisture-generating equipment － high ambient temperature will cause the compressor to overwork, leading to higher energy bills and gradual breakdown of the unit. －malfunction due to high ambient temperature will void warranty ELECTRIC INSTALLATION &...
- Page 8 REMOVAL A. Open drawer completely. Roller clips will be in the down position. B. While holding the sides of the drawer, use your hands to lift side track of drawer C. Lift drawer and remove from channel.
- Page 9 INSTALLATION A.Lower rear rollers into channel slots. B. make two side tracks of drawer horizontal, lower front rollers into channel. C. Make sure drawer tracks are in the right position.
- Page 10 OPERATIONS STARTUP A. The compressor is ready to operate. Plug in the cooler. B. DIGITAL THERMOSTAT are factory-set to give refrigerators an approxiate temperature of 35°F, Allow unit to function several hours, completely cooling cabinet before changing the control setting. Temperature Control Location and Settings.
- Page 11 CLEANING THE FAN BLADE AND MOTOR ■ If necessary, clean the fan blades and motor with a soft cloth. If it is necessary to wash the fan blades, cover the fan motor to prevent moisture damage. CLEANING THE INTERIOR OF UNIT ■...
- Page 12 examples of items that can be abrasive to stainless steel’s surface. • Deposits left on stainless steel can leave spots. Hard water can leave spots. Hard water that is heated can leave deposits if left to sit for too long. These deposits can cause the passive layer to break down and rust stainless steel.
- Page 13 TROUBLE SHOOTING Before requesting any service on your unit, please check the following points. Please note that this guide serves only as a reference for solutions to common problems. SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION Compressor not running. Fuse blown or circuit Replace fuse or reset circuit breaker tripped.
Need help?
Do you have a question about the USCB-36 and is the answer not in the manual?
Questions and answers