Advertisement
Quick Links
Base Storage Cabinet
Read all instructions and warnings before proceeding.
If you do not understand any portion of the instructions,
do not attempt assembly;
EMAIL : customerservice@kindredproducts.net
Call : (866) 456-0866.
This Use & Care Guide Guide provides instructions on
how to assemble and use your Everest
It is critical that the Cabinet be assembled correctly
and according to the instructions.
The product is intended for use in working areas including
offices, homes, craft rooms, garages, etc.
The product is intended to be placed on a level floor
36" W x 18" D x 31" H
Use & Care Guide
Base Cabinet.
™
Maximum weight capacity
of 300 lbs evenly distributed
WARNING!
1. Strictly follow all instructions to avoid an accident,
damage to property, personal injury, or death.
2. Do not sit, stand, or climb on cabinet and do not let children
do so. Components might fail, causing a person to fall,
possibly resulting in serious injury or death.
3. FOR CALIFORNIA RESIDENTS ONLY - WARNING: Cancer
and reproductive harm. For full information, go to
www.P65Warnings.ca.gov.
It is the consumer's responsibility to:
• Assemble this system in accordance with provided
instructions
• Maximum weight capacity of 300 lbs evenly distributed
• Adjustable shelf supports up to 100 lbs
• Failure to follow warning could result in serious injury
Advertisement
Summary of Contents for Everest Base Storage Cabinet
- Page 1 3. FOR CALIFORNIA RESIDENTS ONLY - WARNING: Cancer and reproductive harm. For full information, go to This Use & Care Guide Guide provides instructions on www.P65Warnings.ca.gov. how to assemble and use your Everest Base Cabinet. ™ It is the consumer’s responsibility to: It is critical that the Cabinet be assembled correctly •...
-
Page 2: Box Includes
Preparation 1. Find a soft surface for the assembly process You may need to avoid any scratching (e.g. on top of a rug, a carpet, or the broken down shipping box). Phillips Screwdriver • Drill • 2. One-person assembly is suggested or feel free to invite a friend or family member to help assemble and install. - Page 3 STEP 1 Remove cabinet frame (P1) and lay on its back on a protected surface with the sides facing up. Lift each side panel to an upright position. STEP 2 Take the top panel (P2) and lock each side using the loop and tabs. Secure all six panel tabs within frame loops (See magnifi ed view).
- Page 4 Secure bottom panel (P3) with 2 Panel Screws (A). Tighten with Hex Wrench (E). (See magnifi ed view) STEP 3 Flip cabinet upright. Secure top and bottom panels to frame with Back Screws (B) through the pilot holes. STEP 4 Install 4 leveling feet (D).
- Page 5 STEP 5 Install Shelf Clips. Insert four Shelf Clips (C) in the frame slots at the desired height. These will “click” in place. Install Shelf. Locate Shelf (P6) and with the front facing forward position the shelf above the clips and all the way to the rear of the frame.
- Page 6 STEP 7 Move cabinet to the desired location. Use the leveling feet to adjust the height to eliminate the cabinet from rocking. R to lower L to raise Align the hinge with 1. Press the back part of the the hinge plate. hinge to click into position.
- Page 7 Wipe with soft cloth and a mild dish soap to keep cabinets clean. Dry immediately with a soft, clean cloth. Scan for CONTACT INFORMATION Warranty EVEREST WORLD HEADQUARTERS Information Kindred Products LLC 2460 M-139 Suite B Benton Harbor, MI 49022-6444 Mailing Address P.O.
Need help?
Do you have a question about the Base Storage Cabinet and is the answer not in the manual?
Questions and answers