PRECITEC ProCutter 2.0 Manual

ProCutter 2.0 training
You have purchased a ProCutter 2.0 or already integrated it into your plant and now you would like
to be able to carry out first-class operation, maintenance and repair in accordance with the
regulations?
In this training you will learn everything about the ProCutter 2.0 and its variants.
We will introduce you to the maintenance and repair procedures and then execute them into
practice. Especially for the replacement of optical modules and all other qualified topics according
to the service manual, this training is absolutely necessary to guarantee a smooth maintenance and
repair. Error prevention, error analysis and diagnosis are an essential component and are
supplemented by working in a Flowbox with suitable cleaning tools and fluids.
Target group:
Service technician and commissioning engineer / OEM
customer
Targets:
✓ Installation, operation, maintenance and replacement of the ProCutter
2.0 und its variants
✓ Replacement of optical modules
✓ Error prevention, error analysis und diagnosis
✓ Working in a Flowbox
Details:
−
Cost per participant: 1.500, - €
− Max. participants: 6
−
Training location: Precitec GmbH & Co. KG, Gaggenau, GERMANY
− Training language: English or German (to be defined)
Catering:
Catering will be provided on site and is included in the price.
End of training:
After successful completion of the training, a certificate is issued with the key points learned.