Advertisement
Advertisement
Table of Contents
Summary of Contents for schallenburg QiWi
- Page 1 Instruction Manual Wireless Charger QiWi F A M I L Y O W N E D...
-
Page 2: Included Parts
Included Parts QiWi Charger AC-Adapter Sensor Template Desk Sticker Cable Clips x2 Bracket... -
Page 3: Product Introduction
Product Introduction The QiWi is a wireless charging device that can charge mobile phones or other electronic devices that support the QI standard at a distance of 20~50mm (0.79"-1.97"). The charging rate is stable, and it is suitable for non-metallic desktops such as marble, wood, and glass. - Page 4 Step 1 Mount the bracket in your preferred position under your desk. The small hole for the adapter plug should face inward. Step 2 Insert the QiWi Charger into the bracket, and then connect the power supply.
- Page 5 Step 3 Place the Sensor Template on the desk in the approximate location of the charger. Move the sensor template until the sensor LEDs light up. When the correct position is close, a portion of the LEDs will light up in the direction of the charger.
- Page 6 Step 4 Remove the foil from the double-sided tape and stick it in position. Do not move the template and make sure that the LEDs remain lit. Step 5 Remove the Sensor Template with the LEDs in the middle. Step 6 Stick the Desk Sticker in the hole where the Sensor Template was previously.
- Page 7 Step 7 Remove the remains of template and the installation is complete. Step 8 Place your phone on the center of the Desk Sticker, and enjoy fast and convenient wireless charging.
-
Page 8: Speci Cations
Do not pull the power cord forcefully to avoid breaking or detaching it. To prevent short-circuiting and leakage, do not place the charger or any other components near re or water sources. To avoid electricity leakage due to circuit damage, do not use QiWi in severe high-temperature, humid, or corrosive environments. Precautions To prevent damage or interference with the charger's functionality, avoid placing metallic objects or magnetic cards on the wireless charging surface. - Page 9 Q: Is the Desk Sticker necessary? A: Yes, it is very necessary. The sticker greatly extends the charging distance. At the same time, it will improve the charging ef ciency and prevent overheating. Q: Is it important to align the Desk Sticker with the charger? A: Yes, it is crucial.
-
Page 10: Warranty
Warranty The following conditions are not covered by the warranty: Accessories are not covered by the warranty. Failures due to improper operation or installation by the user are not covered. Failures caused by disasters, man-made damage, self-disassembly, unpacking, and repairs by non-authorized maintenance centers of our company are not covered. www.schaffenburg.nl...
Need help?
Do you have a question about the QiWi and is the answer not in the manual?
Questions and answers