Advertisement
Advertisement
Table of Contents
Related Manuals for Bad Cat Jet Black
Summary of Contents for Bad Cat Jet Black
- Page 1 Jet Black Owner’s Manual BADCATAMPS.COM...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. - Page 3 This symbol is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
- Page 4 Power supply cords should always be handled carefully and should be replaced if damaged in any way. Never break off the earth (ground) pin on the power supply cord. The power supply cord should be unplugged when the unit is to be unused for long periods of time.
- Page 5 The U.S. Government ́ s Occupational Safety and Health Administration (OSHA) has specified the following permissible noise level exposures: Duration Per Day in Hours Sound Level dBA, Slow Response .25 or less According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss.
- Page 6 Bad Cat amp. Since we also play what we build, it is truly gratifying for the Bad Cat Team to be a part of bringing each amp to life and welcome you to the Bad Cat den.
- Page 7 IRs or re-amping is a snap, and there’s a full complement of speaker outputs to choose from. Finally, we’ve included a compact two button footswitch to switch the tremolo on/off and change amp channels. So, there you have it. Meet the Jet Black – the baddest cat yet.
-
Page 8: Front Panel
Front Panel INPUT - Plug your guitar in here. Always use a good quality screened guitar lead. VOLUME 1 - Use this to control the amount of Volume/Gain in Channel 1. You can run this control at a lower setting to achieve cleaner sounds or turn it clockwise to get more gain and harmonics. -
Page 9: Rear Panel
Tremolo circuit. (Note: The foot switch will override this function). REVERB –Controls the wet/dry ratio between the unaffected dry signal and the wet, affected Reverb signal. The Jet Black comes with a huge Reverb trail which works particularly well in conjunction with the Bias Tremolo. -
Page 10: Technical Specifications
IR loaders. Technical Specifications Designed and Built in Southern California Custom Bad Cat Transformers 38 Watts 4 – EL84 Power Tubes 3 – 12AX7 Tubes 2 Channels... - Page 12 For the latest information please visit: WWW.BADCATAMPS.COM. Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement and development, Bad Cat Amps reserves the right to alter specifications without prior notice.
Need help?
Do you have a question about the Jet Black and is the answer not in the manual?
Questions and answers