Lang Aquapres 4905A Quick Start Manual

Aquapres
Product Identification
Hydraulic pressure curing unit
Package Contents
REF 4905A
Intended Purpose
Pressure curing acrylic resin
Other Materials / Equipment Needed
Water
Instructions for Use
Please visit our website to view our
Aquapres
®
www.langdental.com/aquapres.html
For smart device users, scan the QR
code on the right to view the video.
1. If using a stone model, ensure that it has been soaked in
water for about 5 minutes, or until all air has escaped from
model.
2. Fill bowl to overflowing with room temperature water.
WARNING: Very hot water will cause the plastic bowl and
acrylic to distort and become unusable.
3. When acrylic has gelled, place it (while still on model) into
bowl.
4. Place lid on bowl and slide bowl into frame until it reaches
pegs.
5. Turn handle on top of frame in a clockwise direction until 30
psi is generated.
6. Allow acrylic to cure completely, per acrylic instructions.
(Curing under pressure does not affect setting time.)
7. Turn handle counterclockwise until gauge shows no pres-
sure. Remove bowl from frame and place it in sink. Push
down on the release valve and remove lid.
®
Unit includes bowl with gasket, lid with
gauge and release valve, frame, handle
instructional video at