TigerTech RHEMOS Health Monitor Quick Start Manual

Dear Customer,
On behalf of our entire TigerTech team we would like to welcome you to our RHEMOS
Family. Kindly circulate this email with various people who will be using the device.
Here are some basic quick start instructions before you start using the RHEMOS Health
Monitor. Pls also see attached the user manual & training notes. We recommend that
you study this before you start using the device.
IMPORTANT POINTS:
1. Pls charge the device with the supplied charging cable. Pls charge for at least 4
hours for the first time to reach full charge.
2. Pls look for "Mintti
3. Every individual
number and password. This will ensure that
is stored separately. Pls store login/passwords carefully.
4. Pls go to settings menu to change temperature settings to Fahrenheit if required.
5. For Temperature pls hold device
forehead - 0.5
6. For SpO2 test, place the fleshy tip of the center finger of your right hand lightly
on the SpO2 sensor and start the test. The red LED sensor will come on under
your finger and will start transmitting your SpO2 and Heart rate readings to the
App and you will see a wave pattern appearing on the App. DO NOT lift your
finger from the sensor till the reading is complete and the wave pattern stops.
7. Pls ensure that the RHEMOS device is clicked tightly in the blood pressure cuff
before taking BP measurements.
8. Pls ensure that the blood pressure cuff is NOT TIED VERY TIGHTLY around the
arm and has room to inflate. If it is tied too tightly, you will get a "air leakage"
error. Pls see "up" and "down" arrows on the cuff and ensure that you follow user
manual instructions for tying the cuff properly.
9. Pls note that there is a
of the left hand touching 2 sensors and 1 finger of the right hand touching the
third sensor). This is very important to get a perfect ECG
Respiratory rate.
10. For blood glucose, pls start the test, choose whether the reading is a "fasting"
reading or "after meal", choose the strip code & then
per App instructions. Then, ready the blood sample (with the provided lancet).
Once the sample is ready, press "next" on the App and
capillary (on the edge of the strip)
will automatically detect the blood and will start analysis and show the results
within a few seconds of
in mmol/l. To convert to mg/dl, pls multiply the reading by 18.
11. Pls sure the glucose strips are kept in a cool place and are used within 3-5
minutes of removal from the bottle.
12. Pls also note that the RHEMOS switches itself off if unused for some time. If it
switches off, you will have to switch it on again and connect it to the App by
pressing the "connect" button on the App.
COMPANY CONFIDENTIAL. Copyright 2022 TigerTech Smart Living Pvt. Ltd.
QUICK START MANUAL
Vision" App on Appstore / PlayStore.
user / patient can create an account in the App with their phone
close to but not touching the center of the
cm away and then trigger the test on the App.
specific way to hold the device for the ECG (with 2 fingers
with your fingerprick blood sample. The App
the blood sample
every patient's health data &
trace, HRV &
insert strip in the device
touch the end of the
touching the strip. Readings are shown
history
as